17 Oct
2008
17 Oct
'08
11:46 a.m.
Hello!
If I want to output a MIDI note to all channels, what do I have to assign to
snd_seq_event_t *ev;
ev->data.note.channel
Is there a possibility to do so in one strike, or do I ave to iterate
through all 16 channels?
Kindest regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
17 Oct
17 Oct
11:54 a.m.
I think it's up to your MIDI destination to ignore the channel
information (so called 'omni' mode) is it not?
Regards
Victor
----- Original Message -----
From: "Julien Claassen" <julien(a)c-lab.de>
To: "Linux-Audio-Dev" <linux-audio-dev(a)lists.linuxaudio.org>
Sent: Friday, October 17, 2008 2:46 PM
Subject: [LAD] ALSA sequencer question
Hello!
If I want to output a MIDI note to all channels, what do I have to
assign to
snd_seq_event_t *ev;
ev->data.note.channel
Is there a possibility to do so in one strike, or do I ave to iterate
through all 16 channels?
Kindest regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev
12:11 p.m.
Thanks Jens, Victor. BUT: There are a few softwaresynths I can't properly
control or even a few of my hardware pieces, because there such options are
hidden deep within some menus.
So: Can I build/enhance a MIDI-router application to do this for me? Would I
really have to rely on just iterating through all possible output_channels?
Or is there a way to drop the channel information from a snd_seq_event_t, so
all channels must receive it, for lack of absolute information?
Kindest regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
12:31 p.m.
For your hardware it is very likely that you can set omni mode remotely.
Its in the spec, wait a sec ...
For each channel do
Controller 125 (with value zero) for omni on
Controller 124 (with value zero) for omni off
In both cases an all-notes-off is implicit.
/j
On Fri, 2008-10-17 at 16:11 +0200, Julien Claassen wrote:
Thanks Jens, Victor. BUT: There are a few
softwaresynths I can't properly
control or even a few of my hardware pieces, because there such options are
hidden deep within some menus.
So: Can I build/enhance a MIDI-router application to do this for me? Would I
really have to rely on just iterating through all possible output_channels?
Or is there a way to drop the channel information from a snd_seq_event_t, so
all channels must receive it, for lack of absolute information?
Kindest regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev
12:34 p.m.
Hello!
Thanks for the info Jens. I didn't even suspect, that this is standardised.
Kindest regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
12:38 p.m.
Hi,
If you don't mind an extra component, you can easily do this in pd,
csound, etc...
Cheers,
Andrés
On Fri, Oct 17, 2008 at 9:34 AM, Julien Claassen <julien(a)c-lab.de> wrote:
Hello!
Thanks for the info Jens. I didn't even suspect, that this is standardised.
Kindest regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev
--
Andrés
1:08 p.m.
On Fri, Oct 17, 2008 at 04:11:35PM +0200, Julien Claassen wrote:
So: Can I build/enhance a MIDI-router application
to do this for me? Would I
really have to rely on just iterating through all possible output_channels?
AFAIK, yes. Midi receivers can be set to ignore the
channel (omni mode) but there's no such thing as
midi command without a channel number (except for
the system commands).
For the ultimate in MIDI routing & mangling, have
a look at <http://das.nasophon.de/mididings/>
Fully text based, you just need to know some Python.
Ciao,
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Lascia la spina, cogli la rosa.
1:12 p.m.
Thanks again all of you. I now found my solution.
Kindest regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
12:18 p.m.
On Fri, 2008-10-17 at 15:46 +0200, Julien Claassen wrote:
Hello!
If I want to output a MIDI note to all channels, what do I have to assign to
snd_seq_event_t *ev;
ev->data.note.channel
Is there a possibility to do so in one strike, or do I ave to iterate
through all 16 channels?
there is no code in MIDI for "all channels".
--p
6013
days inactive
6013
days old
linux-audio-dev@lists.linuxaudio.org
8 comments
6 participants
participants (6)
-
Andres Cabrera -
Fons Adriaensen -
Jens M Andreasen -
Julien Claassen -
Paul Davis -
victor