Linux-audio-user March 2003

linux-audio-user@lists.linuxaudio.org

134 participants
134 discussions

by torbenh＠gmx.de

hi... this is my first time online since lad Conference. so i would like to announce galan-0.2.14 (as seen on lad Conference) galan is another modular synthesizer. It supports sub patches like pd and jmax. But has separation of mesh and Controls. It also supports OpenGL Scene Graphs which can be controlled by your audio data, the sequencers etc... homepage is at http://galan.sourceforge.net find the download links from there... -- torben Hohn http://galan.sourceforge.net -- The graphical Audio language

21 years, 8 months

[linux-audio-user] New Machine

by Chris

Hi guys! (and gals). I am looking into building a new machine, and I want to do some home-studio recording with it. I was hoping that some of you could lend some of your expert advice. It sounds like SCSI is pretty-much a must in these situations, true? What I was wondering about in particular is if anyone has tried anything like this: Setting up a machine with an IDE hard drive to hold the system files (say an ata 133 7200 rpm...) and a scsi disk for the dumping ground of the audio programs such as ecasound, audacity or Ardour. I think I would put the swap partition on the scsi drive as well. Obviously I am trying to save a little money here, and I am trying to minimize latency. (I think that somewhere around the $2K mark is my limit.) I am accustomed to using multitrack analog units, but digital/computer recording is still extremely new to me. Any thoughts on this? I would also love to hear any suggestions regarding what disks, motherboards, cases and heatsinks people recommend and have had luck with. Thanks! Chris

21 years, 8 months

[linux-audio-user] LinuxConsole

by Yann Le Doaré

From: toby(a)tobiah.org To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] LinuxConsole Reply-To: linux-audio-user(a)music.columbia.edu Yann Le Doaré wrote: >> Hi evrybody ! >> >> (sorry for my poor english) >> >> I am developing a live Linux CD, called LinuxConsole > > What direction will your CD take that would differentiate it from the venerable Knoppix CD? Tobiah -> I am using ALSA Drivers -> Knoppix is not modular (to my knowledge) -> LinuxConsole core files stay in 55Mb

21 years, 8 months

[linux-audio-user] RE:linux-audio-user digest, Vol 1 #331 - 17 msgs

by RichardC＠europlex.ie

Hello linux-audio-user-request(a)music.columbia.edu I have received your e-mail regarding 'linux-audio-user digest, Vol 1 #331 - 17 msgs' I will be out of the office until the 24th of March. Please refer any queries that require immediate attention to Phil Carroll @ philc(a)europlex.ie Regards Richard Caldwell

21 years, 8 months

[linux-audio-user] LinuxConsole

by Yann Le Doaré

Hi evrybody ! (sorry for my poor english) I am developing a live Linux CD, called LinuxConsole (http://linuxconsole.tuxfamily.org) First it was made to use a PC box as a console games. Now it plays games, music, videos, browse Web, disks, burn CDs,... It is a "modularized" CD, the 'core' system (drivers+X11+Window maker) stays in memory, while modules (mozilla, games, cups, openoffice) stay on CD or hard disk (ext fs,fat,ntfs,...). I'am using ALSA drivers. I search someone to help me to make an 'audio' module, with most linux audio applications If someone is intrested, thanks to post a message to LinuxConsole forum Thanks Yann Le Doaré Brest France

21 years, 8 months

[linux-audio-user] ZynAddSubFX 1.2.0

by Nasca Paul

Hi. I released ZynAddSubFX 1.2.0 It is a powerfull software synthesizer for Linux and Windows, and it is located at http://zynaddsubfx.sourceforge.net/ News: 1.2.0 - ZynAddSubFX is ported to Windows ;-) - added internal Virtual Keyboard - added Configuration window - added frequency tracking to filter - improved the OscilGen (harmonic filter, RMS normalisation, etc..) - improved the recorder (uses the WAV file format and it starts only when a key is pressed) - added filter interpolation if the frequency is changed very fast (it removes some annoying clicks) - other improovements, bugfixes, speedups and cleanups of the code Paul. __________________________________________________ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com

21 years, 8 months

Re: [linux-audio-user] Devices in Audacity

by John Ouzts

>John Ouzts wrote: >> I just did a fresh Gentoo 1.4 install in a new machine with an RME 96/8 PAD >> card, which uses the rme96 driver. System sounds now come to my hifi system >> through the rme card, so I think the driver is loading and working. > > > >I cannot get Audacity or Ardour to record, however. Audacity works fine in >>the > >same machine when using the monopolist's operating system, however. Running > >on that partition, Audacity finds 11 or 12 sound devices, the 8 RME >>channels > >and the builtin VIA sound chip devices. Under Linux, Audacity only finds > >/dev/dsp, and sometimes not that. > > > >How do I get Audacity to see other devices, or is that my problem? > > > >John > > > >This seems like a simple(tm) setup problem. > >Can you send us the output of... > >lsmod; cat /proc/asound/cards > >That will give us an overview of your setup. Thanks Patrick, here's what you asked for: Module Size Used by Not tainted snd-pcm-oss 39300 0 (autoclean) snd-mixer-oss 13624 2 (autoclean) [snd-pcm-oss] snd-via82xx 9356 0 snd-ac97-codec 31044 0 [snd-via82xx] snd-mpu401-uart 3840 0 [snd-via82xx] snd-rawmidi 15584 0 [snd-mpu401-uart] snd-seq-device 4416 0 [snd-rawmidi] snd-rme96 16396 2 snd-pcm 67936 0 [snd-pcm-oss snd-via82xx snd-rme96] snd-timer 12840 0 [snd-pcm] snd 31852 0 [snd-pcm-oss snd-mixer-oss snd-via82xx snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device snd-rme96 snd-pcm snd-timer] soundcore 3940 7 [snd] ntfs 71148 2 (autoclean) 8139too 14728 1 sr_mod 12184 0 (unused) sg 26124 0 (unused) ide-scsi 7600 0 0 [PAD ]: Digi96 - RME Digi96/8 PAD RME Digi96/8 PAD at 0xdd000000, irq 19 1 [8233AC ]: VIA8233 - VIA 8233A/C VIA 8233A/C at 0xe400, irq 10 I have also discovered that kmix appears as a gray window without any sliders or labels. Alsamixer shows one slider labelled DAC, which will adjust. I also got an error message with says: Mixer device /dev/mixer is missing volume and PCM controls. Gentoo uses devfsd, so I am wondering if I need to set some devices in devfsd.conf. Thanks again, John

21 years, 8 months

[linux-audio-user] How can I make CDDB info become the file name?

by Steven P. Ulrick

Hello, everyone :) I have been teaching myself to do all my work with extracting from and recording to CD's from the command line, using Red Hat Linux 8. I have been having excellent success, but there's one thing I haven't been able to figure out. Before posting this, I studied the man pages for cdrecord, cdparanoia, cdda2wav and lame, and I couldn't find what I was looking for, so here goes: is there any way that I can have the song titles that I download from CDDB be automatically made into the filenames of the tracks that I extract or encode? Example: I just ran cdda2wav -vall cddb=0 -D0,1,0 -B -Owav from the command line, and I got the following output (suitably clipped): Album title: 'Mansion Builder' [from 2nd Chapter Of Acts] Track 1: 'Rod And Staff' Track 2: 'Mansion Builder' Track 3: 'Ps. 93' Track 4: 'Gold In The Clouds' Track 5: 'I'll Give My Life Away' Track 6: 'Rainbow' Track 7: 'Well, Haven't You Heard' Track 8: 'Lightning Flash' Track 9: 'Starlight, Starbright' Track 10: 'Make My Life A Prayer To You' Track 11: 'Daydreamer' Later in the output, I got messages like these: track 1 'Rod And Staff' successfully recorded track 2 'Mansion Builder' successfully recorded track 3 'Ps. 93' successfully recorded Here are the file names relating to the above samples: audio_01.inf audio_01.wav audio_02.inf audio_02.wav audio_03.inf audio_03.wav Is there any way that, instead of the filenames being like those above, that I can just have them come out this way, so that I can save having to manually rename them if I want to make an mp3 cd (our DVD player displays the folder names and track titles on our TV :)): Mansion Builder - 2nd Chapter Of Acts.wav Ps. 93 - 2nd Chapter Of Acts.wav Rod And Staff - 2nd Chapter Of Acts.wav I just tried k3b, and it created a 2nd Chapter Of Acts/Mansion Builder folder, and it put the following automatically in it: Mansion Builder.wav Ps. 93.wav Rod And Staff.wav If anyone can enlighten me on how to do that from the command line, I would be very appreciative :). I don't care if I have to use a different command than I've been using, as I'm willing to learn :) Steven P. Ulrick

21 years, 8 months

[linux-audio-user] RE:linux-audio-user digest, Vol 1 #336 - 1 msg

by RichardC＠europlex.ie

Hello linux-audio-user-request(a)music.columbia.edu I have received your e-mail regarding 'linux-audio-user digest, Vol 1 #336 - 1 msg' I will be out of the office until the 24th of March. Please refer any queries that require immediate attention to Phil Carroll @ philc(a)europlex.ie Regards Richard Caldwell

21 years, 8 months

[linux-audio-user] Recording live audio

by Angel Gabriel

I would like to record live audio.... quality is not important, what is important is that it is a clear recording. It's a lecture recording, the only output that is avalible, is a monitor out, which comes straight from the mixing desk. Are there any recommedations, as to which application to use?? Thanks in advance. -- ***** Not everyone is touched by an Angel... ... Those that are, never forget the experience *****

21 years, 8 months

← Newer
1
2
3
4
5
6
7
8
9
...
14
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user March 2003