This is Steinway_IMIS soundfont, version 2.2.
This version fixes the issue with loops. I hope this is the good one
and there are no more remaining major bugs.
Marcos is a little busy right now, so he asked me to make this fix. He
is thinking to make other improvements, so expect more updates soon.
I'm happy to report that as of this morning, 100-Watt KNYO-FM in Fort Bragg California (http://en.wikipedia.org/wiki/KNYO-LP) is running on Linux, Linux Audio and Free Software.
(Well, then again, I can't speak for their website; I didn't set that up, and it looks like an F5 box, dunno what they run. But the actual streaming and broadcast radio signal chain up to the transmitter is Linux.)
The FM transmitter is in a remote location getting its audio program from a Raspberry Pi running Raspbian connected via DSL to a Linode running Airtime and Icecast2 for station automation and streaming. The studio machine is a Linux Mint XFCE box running The BUTT connected via DSL to the Linode and Airtime. I've done a few Liquidsoap customizations to Airtime to fill in missing features (AutoDJ, saving incoming streams, etc) and will be doing more, possibly contributing them upstream if I can keep them clean and general enough.
I'm the (un?)lucky owner of an M-Audio Fast Track Pro USB audio
interface and I'm having some serious problems getting this device to
record audio reliably under Linux.
I've been using arecord and occasionally Audacity for all of my
testing. My problem is this: Recording a take works about 80% of the
time. In the remaining ~20% of cases, the captured audio is extremely
loud with severe digital distortion. Once this problem shows up, it
persists for any subsequent takes. The only way I've found to make
the problem go away, at least temporarily, is to power-cycle the Fast
I considered the possibility that this particular device might be
defective, but it seems to work wonderfully under Windows.
I'm calling out to other Fast Track Pro users in the hope that someone
out there has encountered the same problem and better still, found a
Any suggestions at all would be greatly appreciated!
Does anyone know of a good plugin that will generate subharmonics?
I would like to put a little more low frequency "oomph" into my bass
track. Preferrable LADSPA, but VST would work, too.
Thanks for any help!
Research tells me that QSynth seems to be the only currently
available/usable GUI for FluidSynth, but I get big xruns whenever I try and
use it. FluidSynth itself doesn't cause me problems (I know because I'm able
to use the FluidSynth-DSSI plugin fine in Rosegarden etc). The problem is
that I want to use FluidSynth with Ardour3, but Ardour3 doesn't support DSSI
plugins yet. So the only solution I have is to find a standalone interface
for FluidSynth and then to link up using Jack. I looked at the old GUI
'FluidGUI' but it seems to be so old that it won't properly install on
recent versions of Ubuntu.
So does anyone know of:
1) A GUI for FluidSynth other than QSynth and FluidGUI?... or
2) An application other than the above 2 which would allow me to load
Thanks in advance.
I was very excited to find a video of the
Tristan and Isolde on YouTube recently,
I used the youtube-dl utility to grab the video,
when I began playing the copy on my hard-drive
totem, to my horror, the English subtitles
not there! To repeat, the subtitles are on
youtube.com but not in the .webm file that
downloaded with youtube-dl.
Can someone coach me how to download a version
with the English subtitles? Or are there subtitles
in my downloaded version and totem is just not
Thank you for your help.
P.S. On the totem menu under View, there
command called Subtitles
but this prompts me for
Is there a subtitle file in addition
the video file that I need to download from
youtube? Thanks again.
I found this old discussion about the Zoom R16 in the archive of LAU.
Strangely, in that archive there is a missing reply from Mr. Brett McCoy.
(You can find the missing one a the bottom of this archive:
Mr. McCoy claims to have enabled the Zoom R8 (yes, there is quite a
difference between r16 and r8) as a multi-input soundcard for ardour and
also as a control surface in 12.04 64bits.
There is no information as to which driver is being in use in his post. And
searching the web only leads me to various WIP to get the R16 running on
My question is, has anyone got any news about this device and a possible
Specifically to Mr. Brett McCoy: what driver did you use to make jack aware
of your r8?
Thank full for any hints, yours,
Just bringing the news...
This is the 3rd beta of the upcoming Carla 2.0 release.
There have been quite a few nice features implemented since beta2.
- Internal patchbay mode
- Carla as VST plugin (Linux only)
- Carla LMMS plugin
- New and updated skins
- Old non-skin mode
To download binaries or source code, jump into the KXStudio downloads
If you're using the KXStudio repositories, you can simply install
"carla-git" instead (plus "carla-lv2" and "carla-vst" if you're so
Bug reports and feature requests are welcome! Jump into the Carla's
Github project page for those. 
See the top link for more details and screenshots.
Some old posts exist about the UAC2 support for the Sound Devices USBPre2 but some problem remains.
The current status is that this sound card is supported as a USB 1.1 card in high-speed mode.
But this card is not seen as a Usb Audio Class 2 on Linux. On Mac OS X this card is recognized as UAC2.
My principal problem is that the "device descriptor" provided by the card is always a USB1.1 class
There is two modes of boot for the card (pressing the "1" button, the card is in full speed mode, without pressing in UAC2 mode)
There is only one difference between these two modes in the lsusb -v : the "bInterval" go to 4 from 1.
This is already view by Clemens on:
In this another post, we can seen:
Bernardo Barros wrote:
> Ok, I reconnected without pressing "1".
> Bus 002 Device 002: ID 0926:0202
> Device Descriptor:
> bNumConfigurations 2
Strange, I have never 2 on bNumConfigurations ! Somebody can test it on its card ?
This is perhaps my problem, my card only provides one "Configuration Descriptor".
The second one is certainly the UAC2 "Configuration Descriptor".
The lsusb without 1 pressed : http://pastebin.com/8yjjASv7
The lsusb with 1 pressed : http://pastebin.com/pGFdjR4K
The usbmon trace of the insertion of the usbpre2 (without "1") : http://pastebin.com/pySC4Age
This sound card is great, it is very disappointing to not be able to used it with all functionnalities.
I search help in order to debug this problem.
I am devlopper, I can test kernel patches without problem.
Thank for any idea (or patch).