Linux-audio-user June 2003

linux-audio-user@lists.linuxaudio.org

120 participants
118 discussions

by holborn

Hi! new release ...horgand-092 Program is released GNU/GPL version 2. Horgand is a organ, Jack capable and recognizes MIDI Program Change (1-32). Horgand is tested on a PIII 966 (Debian Sid ) and PII 300 (Gentoo). Changes in 0.92 ---------------------- -Added Reverb at this moment only presets available. -All the sliders and dials widget reponse in realtime. -Solved bug in keyboard level scaling, that reduced noises, unfortunatelly sound changes a little bit. -Small look changes and other minor bugs solved. REQUERIMENTS: * FAST COMPUTER * LINUX * ALSA * JACK * FLTK 1.1 Web Page : http://personal.telefonica.terra.es/web/soudfontcombi/ Josep

21 years, 5 months

[linux-audio-user] (no subject)

by Joe Massin

Say know to spam !!! http://www.pornstarguru.com/page.php?x=158594&m=4 _________________________________________________________________ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

21 years, 5 months

[linux-audio-user] Is 5.1 sound supported on the TurtleBeach SantaCruz?

by Harold Martin

Hello, Is 5.1 DVD sound supported on the TurtleBeach SantaCruz card? Thanks, Harold

21 years, 5 months

[linux-audio-user] how to build a studio?

by Joshua N Pritikin

i'm new to pro-audio world and i need some advice about how to setup a studio. i got my PC setup with an RME HDSP-9652 + SPDIF A/D D/A converter. Ardour works great. i'm planning to purchase a FocusRite OctoPre/ADAT and a bunch of microphones. i think i need speakers too. Is there anything like digital speakers or digital amps which can accept ADAT directly from my linux box and turn it into sound? Or do i need to convert ADAT to analogue and plug that into a conventional amp/speaker system? Considering how much care i'm taking to record sound digitally, without noise, it seems like i should also take care that the speakers can actually playback my recordings without too much distortion. Anyone have any recommendations? -- Victory to the Divine Mother!! after all, http://sahajayoga.org http://why-compete.org

21 years, 5 months

[linux-audio-user] Re: [Alsa-user] Delta 66 and cd's : stupid question

by Allan Klinbail

On Thu, 2003-06-12 at 20:43, Pierre Jarillon wrote: > Le Jeudi 12 Juin 2003 12:22, vous avez écrit : > > Hey thanks for the tip .. > > > Can you record with your delta66 ? Yes without any problems. I have recorded using both arecord and ecasound. I am reinstalling jack e.t.c.. with the aim of using Ardour, it seems there are succesful users of these devices there. > > I have a delta44 and I can only use it to play. > However the Vu-meters of envy24control shows a correct input level, but > how can I redirect this input toward a recorder, especially audacity ? As for audacity, I haven't really tried. Maybe someone else has used audacity with a Delta card.... I'll install it and give it a go -- Allan Klinbail <allank(a)labyrinth.net.au>

21 years, 5 months

[linux-audio-user] Delta 66 and cd's : stupid question

by Allan Klinbail

Okay, Now that I have pretty much decided to give up the ghost on the intel8x0 as a hardware patchbay seems to be a better option, (and I think the onbaord audio system may have shorted .., the driver now refuses to load all setting are as they previously were) Has anyone got any suggestions regarding playing cd's while not doing audio work? (as there is no cd input on the delta66). Is there a player that will read the digital audio and send it to the sound card .. such as an unmentionable player from another OS? Or do I need to begin ripping and converting to mp3 (yuck) cheers -- Allan Klinbail <allank(a)labyrinth.net.au>

21 years, 5 months

[linux-audio-user] NI Traktor

by Robert Jonsson

This is a first for audio applications. Native Instruments Traktor just appeared on Freshmeat! :) I guess some people are starting to take notice of the OSS community. Though it isn't OSS in itself and not available for Linux (OS X, + a few marginal os:es). But the most interesting thing was that they used Freshmeat as a marketing channel. /Robert

21 years, 5 months

[linux-audio-user] re: how to build a studio? (Joshua N Pritikin)

by urban

At 05:19 11.06.03 -0400, you wrote: >i'm new to pro-audio world and i need some advice about >how to setup a studio. > >i got my PC setup with an RME HDSP-9652 + SPDIF A/D D/A converter. >Ardour works great. i'm planning to purchase a FocusRite >OctoPre/ADAT and a bunch of microphones. > >i think i need speakers too. > >Is there anything like digital speakers or digital amps which >can accept ADAT directly from my linux box and turn it into >sound? Or do i need to convert ADAT to analogue and plug >that into a conventional amp/speaker system? > >Considering how much care i'm taking to record sound digitally, >without noise, it seems like i should also take care that >the speakers can actually playback my recordings without >too much distortion. > >Anyone have any recommendations? > Hi - i´m studiing tonmeister. My first tip: spend money on room acoustics. (record a sinus-sweep and screen it. any omni will do.) this point is more important than what speakers you use, because speakers sound different in different rooms. You need a D/A-converter with balanced output and active monitors. active monitors have tech. advantages vs. the combination amp/passive speaker. i would go for gaithain speakers (all modells, 2000 - 5000 EUR), but this is matter of tast. tannoy reveal cost about 250 $. i dont recomend ANY genelec speakers or yamaha. i personally like reveal a lot, for me there is no competition in this price range. most important is that you get no 'bad surprise' when listening to your mix on hi-end monitors. even if reveal don´t sound so spectacular, you will have no such surprise with them. reserve most of your money for mics. what thing are you going to record? HTH, urban

21 years, 5 months

[linux-audio-user] Can't get rosegarden4 to record from ALSA virmidi

by Larry Troxler

Has anyone got rosegarden to record from an ALSA virmidi port? I can't get it to work, and apparently nobody on the rosegarden list has tried it, so that so far, I have not got any answers there, probably because the developers are very busy with other things.. But I thought I'd ask here as well, because there may be some rosegarden users that aren't on their list, and I'm getting hungry to get this solved. I'm hesitant to submit a formal Rosegarden bug report just yet, because I could be misunderstanding something about the way virmidi works. In case anyone's interested, Rosegarden is a sequencer app that uses the ALSA MIDI sequencer API. What I'm trying to do is load a the virmidi device, and then aconnect 72:0 73:0 for example. Then I set up the record device in Rosegarden to record from 73:0, and set up a play track that plays on 72:0. Thus when I record, I would expect that events get recorded onto the record track, but it doesn't happen. I also can't record events to that track if I play them from PD, using the OSS compatilibilty interface, through a device that is symlinked to 72:0. However, PD itself has no problems linking the two devices together - Through PD I can play through 72:0 and have PD receive the message back through 73:0. It is entirely possible that I'm making some silly mistake, so that's why I ask here. Can anyone suggest some other test to try? Is it possible that there is a bug in ALSA where using the sequencer API doesn't work when getting events from a virmidi device? Or is it more likely a bug in Rosegarden? I already tried making sure that Rosegarden seem to be opening the correct record device, by hardwiring this in the source code. What's left next for me to try, is opening the 73:0 device in record direction only (Rosegarden I beleive is opening it in duplex mode). So, any thoughts? Is there some simpler application I could try as a sanity check, to see if my ALSA and virmidi are working? Larry Troxler

21 years, 5 months

[linux-audio-user] Newbie/Laptop/Linux/Audio

by sh＠nnon.tv

I'm fed up with expensive upgrades and a dull computer experience so I'm making the leap from Apple. I've just built a bare bones Linux box with AMD 2600+/9700Radeon/120gig HD/ CD DVD RW/ etc and crammed it into a Shuttle box. Small and runs cool. Slackware is happy on it. I need to augment my audio computer needs with a laptop. I've looked around on the archives and have not found a consensus and would appreciate some help in this area. What works with Linux and audio best on a laptop? I've been looking at IBM T30/T40 used but don't know really what to get. thanks, Shannon

21 years, 5 months

← Newer
1
...
5
6
7
8
9
10
11
12
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user June 2003