Hello all,
I had my machine running with 2.6.9-rc3-mm3-VP-T3 and alsa at a 64 sample sized buffer, but pd was having some torubles when I ran both jackd and pd as root. I was told to use the realtime-lsm module, so I went the jack sourceforge page and followed the links, rebuilt and installed a nre kernel that should load the realtime-lsm module so that I could run pd with the setuid bit set, and jackstart to avoid a/d/a sync errors.
Now on boot I get:
kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)
Ive tried setting the root=/dev/hdaX to no avail. What is going wrong?
Im now just trying to retrace my steps on how I got 2.6.9-rc3-mm3-VP-T3 set up on my x64 laptop, because I tried to rebuild the kernel from fresh sources and got the same error. There wsa the slight possibility of source contamination from the previous source tree, so Im trying again...
Also, Ingo\'s VP people.redhat page is empty, where\'d it go?
Thanks for the help!
-thewade
On Thursday 21 October 2004 18:00, linux-audio-user-request(a)music.columbia.edu
wrote:
> > /dev/hda � � system hd
> > /dev/hdb � � DVD burner
> > /dev/hdc � � data hd
> > /dev/hdd � � DVD reader
> >
> > Does this look OK? (Does it matter where i plug the drives at all?)
>
> I think this setup looks good. Give it a try.
Why does "everyone" set things up with HDs on one channel, CDs on the other? I
was told that the slower CD device will slow down the HD. I had run Windoze
with a setup like the above with no problems, however.
Hi,
I have made a patch which adds support for samplerate conversion to
XMMS's OSS output plugin. Samplerate conversion is done using Erik de
Castro Lopo's libsamplerate aka Secret Rabbit Code.
Why? Because there are soundcards which support only single samplerate
in hardware (usually 48 kHz). To get best possible sound quality out of
these, you'll need high quality samplerate conversion when playing 44.1
kHz files/streams.
All comments on this are welcome.
Patch is available from:
http://www.sonarnerd.net/linux/xmms-rabbit.patch
--
Jussi Laako <jussi.laako(a)pp.inet.fi>
Hi,
Is anyone out there running a 2.6.x kernel under Gentoo and using a
Midisport 2x2? I'm trying to set up my 2x2 under Gentoo but cannot
make either hotplug and/or Alsa happy. The Alsa sound card page seems
to be down as they are redoing the web site technically and I cannot
access any info.
The 2x2 is seen by usbview as an unknown device. (763/1001 I believe)
I've loaded fxload on the system.
Anyway, looking for a few pointers.
Thanks in advance,
Mark
I have a Linux computer designated to do audio work.
Currently i have *one* hd as /dev/hda and a DVD writer (DVD-RAM capable)
as /dev/hdc. I want to add another hd to separate system and (audio) data.
I also have a spare DVD drive which I want to plug into the system.
I do not know much about ide related hw issues, but i can imagine that it
could be better to have the two hd on *separate* ide channels, but i don't
really know if it has any significance. Does it?
Does it make a performance difference if a drive works as master or slave?
The only thing i care about is audio performance of the system.
I don't care about the optical drives performance as long as they are
working...
My first try would be something like:
/dev/hda system hd
/dev/hdb DVD burner
/dev/hdc data hd
/dev/hdd DVD reader
Does this look OK? (Does it matter where i plug the drives at all?)
Thanks for sharing your knowlege,
Robert Epprecht
Have you tried Air Font? I haven't been able to give any of the sets a try
yet (due to lack of time, I just CAN'T WAIT now, honest) but it seems to be
getting very good reviews at Hammersound. I have now downloaded both Air
Font and Fluid r3 (as I read your post)..
BTW, I'm not sure that the SB soundfont is FREE for anyone to use, I think
it's likely that you can use it in whatever way you like (softsynth etc)
provided that you HAVE a SB anyway?
Cheers,
Alex
>and the pianos are good too. I agree that Creative's fonts aren't really
>all that good (though I do like the pianos), but they're free (as in beer,
>I think) and work well with TiMidity and fluidsynth.
>
>Btw, I use the Fluid_R3 soundfont with TiMidity for synth work. To my ears
>it's about par with Hyper Canvas.
_________________________________________________________________
Móviles, DVD, cámaras digitales, coleccionismo... Con unas ofertas que ni te
imaginas. http://www.msn.es/Subastas/
Good point. The other thing you lose comes from your "but you can mix both
together", which should be completed as "if you have an analog mixing
console"! :-) If you have to add a console to the $24 of the SB, then it
becomes a different thing! :-) Plus I'm trying to save physical space and
build a small studio I can take from place to place (can't record drums in
my flat for instance).
Because of this, I think I'm more inclined to big CPU and digital mixing.
The fact that you can do things such as route soft synth sounds to ladspa
plugins or route different digital audio outputs to the same soundcard
(thanks to Jack) is a kind of dream come true, I think we all tend to assume
these possibilities as natural but they are a kind of miracle
flexibility-wise.
Cheers,
Alex
>Yeah, the only really good bet is to get an sblive card, I got an oem for
>only $24 and the onboard synth works great with alsa. You get the benefit
>of 0 latency for playing back sound fonts, but you also lose out, with
>software synths like fluidsynth its possible to send the soundfonts
>through ladspa plugins, while in hardware this isn't possible. But you can
>mix both togther, so I usually use the hardware for my percussion sounds,
>which screw up the music if they glitch out, and then I can use software
>for stuff I want to put effects on.
_________________________________________________________________
Acepta el reto MSN Premium: Correos más divertidos con fotos y textos
increíbles en MSN Premium. Descárgalo y pruébalo 2 meses gratis.
http://join.msn.com?XAPID=1697&DI=1055&HL=Footer_mailsenviados_correosmasdi…
Hi! I need some help on looping a sound using ecasound.
I use the GNU/Linux system as an effect processor (reverb and eq) for a live
show. Some of the list members point my attention to ecasound to do that, and
is working great.
Now I need to play some sounds in loop while doing the effect processing.
Particullary, it would be great to press a key to start playing a sound in
loop, until another key is pressed and that starts playing a second sound in
loop, and so on.
So I tried a simple bash script to do that (using aplay), but it didn't work
as I get a sound interrupt for each loop. Then I made a program in C (using
ncurses and sndlib) to do the job, that's almost finished and seems to work
ok.
And now the questions:
¿Is there a "natural" way of doing sound loops (in the way I discribed) using
ecasound? ¿How can I "connect" the C program to ecasound (without using jack)
while using it as a real-time effect processor?
Thanks a lot and sorry for the long description.
Martín.
Hi all,
A timer in a window that counts up in seconds, clicking on it resets the time
back to 0. for seeing how much time you've got left during a live gig...
Requires python,tkinter
cheers,
dave
--->8---
#! /usr/bin/env python
from Tkinter import *
from time import *
class clock:
def __init__(self,master):
self.starttime=0
self.widget=Button(master,text="0:0",font=("Courier",50,"bold"),relief=FLAT,command=self.reset)
self.widget.pack()
def idle(self):
thistime = int(time()-self.starttime)
self.widget.config(text=str(thistime/60)+":"+str(thistime%60))
self.widget.after(1000, self.idle)
def reset(self):
if not self.starttime:
self.widget.after_idle(self.idle)
self.starttime=time()
win = Tk()
win.title("ticktock")
slider = clock(win)
win.mainloop()
Yeah, the only really good bet is to get an sblive card, I got an oem for
only $24 and the onboard synth works great with alsa. You get the benefit
of 0 latency for playing back sound fonts, but you also lose out, with
software synths like fluidsynth its possible to send the soundfonts
through ladspa plugins, while in hardware this isn't possible. But you can
mix both togther, so I usually use the hardware for my percussion sounds,
which screw up the music if they glitch out, and then I can use software
for stuff I want to put effects on.