by Kjetil Svalastog Matheussen <k.s.matheussen@notam02.no>
Jeremiah Benham:
>
> When launching snd-ls I get this in a pop-up window:
>
> [08:30:23] dynamic-link: misc-error: file: "/tmp/fileCl5fI2.c.so",
> message: "/tmp/fileCl5fI2.c.so: cannot open shared object file: No such
> file or directory"
> (while loading "/usr/local/snd-ls/init.scm")
> ; (load "/usr/local/snd-ls/init.scm")
>
> at the command line it says:
>
> Compiling /tmp/fileCl5fI2.c
> /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld:
> /tmp/ccerLFbD.o: relocation R_X86_64_32 against `a local symbol' can not
> be used when making a shared object; recompile with -fPIC
> /tmp/ccerLFbD.o: could not read symbols: Bad value
> collect2: ld returned 1 exit status
>
>
> What should I do? Snd-ls launches but it isn't running as it should
> odviously.
>
Oops....
Does this work?:
export CFLAGS=-fPIC
/usr/local/snd-ls/snd-7/snd -noglob -noinit -l /usr/local/snd-ls/init.scm
[after writing this I found
http://lists.agnula.org/pipermail/users/2005-June/006358.html in the
agnula-users archive. many of the same points are raised, but it appears
not yet corrected in the wiki.]
[and now I've found and have begun reading the more recent thread:
http://lists.agnula.org/pipermail/users/2005-June/006417.html
still I'm wondering which of the deb lines below is correct]
There seems to be some inconsistency on the agnula pages on the correct
apt sources line. I want to try adding demudi to a fresh debian sarge
install.
Here: http://demudi.agnula.org/wiki/InstallApt
it says use this:
deb http://demudi.agnula.org/packages/demudi testing main
and in the FAQ:
http://demudi.agnula.org/wiki/DocumentsFaq#Upgradingexistinginstallations
it says use this:
deb http://apt.agnula.org/demudi testing main local extra
Are those 2 apt sources the same? if not which is correct?
These instructions from the FAQ are somewhat confusing:
"* from the command line issue:
# apt-get install demudi
* install the tasks you are interested in. To have a look at them run:
# apt-cache search demudi
The task demudi installs them all."
It should probably tell the user to apt-get update after editing
sources.list. Also, the two statements above appear to be contradictory,
or at least out of order.
Installing package demudi appears to only install some pixmaps and pngs.
Attempting to install any of the demudi-<foo-task> packages returns
saying that it's not available and is replaced by demudi. Maybe these
only work if you use taskselect?
I must be missing something pretty basic here.
--
Eric Dantan Rzewnicki | Systems Administrator
Technical Operations Division | Radio Free Asia
2025 M Street, NW | Washington, DC 20036 | 202-530-4900
CONFIDENTIAL COMMUNICATION
This e-mail message is intended only for the use of the addressee and
may contain information that is privileged and confidential. Any
unauthorized dissemination, distribution, or copying is strictly
prohibited. If you receive this transmission in error, please contact
network(a)rfa.org.
Hello,
We use an hdsp multiface on our laptop for playback and recording. It's
a wonderful interface, but its connection from the box to the cardbus is
a terrible liability, as the cardbus card connection is flimsy, falls
out easily, and also breaks easily (we are on our third cable currently,
and we may need to get a new cardbus card soon)...
I'm wondering if there is any pcmcia interface at the quality level of
the multiface that wouldn't have such a terrible cable connection, and
which is also supported by linux. Freebob is promising, but as we
understand it's not nearly at production level yet. The only other kind
of thing I can think of is one of those $1000 Magma pci-to-pcmcia
interfaces they use with protools, which might allow us to use a real
pci device like a delta 1010, or even the hdsp with a reliable
connection. They claim to be compatible with laptops running red hat 9
up to kernel 2.6.5, after which it hasn't been tested. Has anyone used
something like this successfully with newer kernels/distros?
Thanks,
Matt Barber
> Date: Sat, 2 Jul 2005 11:46:40 -0400
> From: Joe Hartley <jh(a)brainiac.com>
> Subject: Re: [linux-audio-user] Using Linux as Bass
> amp
> To: A list for linux audio users
> <linux-audio-user(a)music.columbia.edu>
> Message-ID:
> <20050702114640.0a27768e.jh(a)brainiac.com>
> Content-Type: text/plain; charset=US-ASCII
>
> On Sat, 2 Jul 2005 16:19:12 +0200
> Christoph Eckert <mchristoph.eckert(a)t-online.de>
> wrote:
>
> > I just ordereed an electric bass (passive). I'd
> like to
> > directly plug it in into my soundcard and to use
> Linux as an
> > amplifier (and record it to ardour, of course).
> >
> > As I'm not yet familiar to basses and guitars yet,
> I wonder
> > what I should use for the bass.
>
> You're not really going to be able to do this, at
> least not well.
> The signal put out by the passive bass is not going
> to be enough to
> get a decent sound, no matter how you process it
> with plugins.
>
> I just talked to my bass-playing son, who
> recommended looking at DI
> (direct input) boxes, and suggests that if you
> really need to do this on
> the cheap, Digitech makes a line of effects pedals
> for the bass that
> have both amp and mixer output jacks, and that the
> mixer jack will be
> OK to plug right into a soundcard. He recommends
> the Bass Driver pedal,
> which will give you some good sounds. If you have
> an amp (either bass or
> guitar), you might have an output on there that'll
> do the trick as well.
>
> Hope this helps!
>
> --
>
======================================================================
> Joe Hartley - UNIX/network Consultant -
> jh(a)brainiac.com
> \Without deviation from the norm, "progress" is not
> possible. - FZappa
>
Hi,
This is my first post to this list (or any list for
that matter) so, if something's awry, I apologize in
advance.
I wanted to endorse the suggestion of using a DI box
to get a decent bass signal into your recording gear.
I've had really good results with my bass through an
inexpensive Behringer (DI-100) that runs around $35.
Good luck,
Neal
____________________________________________________
Yahoo! Sports
Rekindle the Rivalries. Sign up for Fantasy Football
http://football.fantasysports.yahoo.com
Hi,
recently I managed to get a latency of about 16msecs on my USB
device thanks to helpful people on this list (you know who
you are ;-). Thihs is much better than the 48msecs I got
before.
I still wonder and am trying to get even less latency without
xruns.
Before, I used a vanilla 2.6.10 with the RT-LSM-patch applied.
Meanwhile I installed a 2.6.12 with the preempt patch of INgo
Molnar. Unfortunately, it didn't get better results
concerning latency on my usb audio device.
So I'd like to know some things:
* Does a 2.6.12 with Ingo's patch require further system setup
to get lower latencies, or
* Should I apply futher patches and if which ones (RT-LSM has
been dropped)?
* What system tweaking is needed to get less latencies?
Any wee small hint is much appreciated.
Thanks & best regards
ce
I know this is not really the place to ask for it but I don't think it's
worth subscribing to a new list just for this simple question.
I run fluxbox on an Asus L2000D laptop. Everything is fine except that I
can't set my mouse speed!!
I searched the holy google but nothing turned up or the solutions didn't
work ("xset m X Y" seems to only configure my touchpad and "Option
Resolution x" in XF86Config-4 doesn't do anything).
Anyone knows how to do that?
Apart from that everything's fine except that I have to do "sudo
/etc/init.d/realtime restart" everytime I want to run jack as normal
user. It doesn't seem to read quite well the /etc/default/realtime when
starting because this is already set to grant realtime default to all
users in audio group.
I run debian unstable, kernel 2.6.8.
by Kjetil Svalastog Matheussen <k.s.matheussen@notam02.no>
Jeremiah Benham:
>
> When launching snd-ls I get this in a pop-up window:
>
> [08:30:23] dynamic-link: misc-error: file: "/tmp/fileCl5fI2.c.so",
> message: "/tmp/fileCl5fI2.c.so: cannot open shared object file: No such
> file or directory"
> (while loading "/usr/local/snd-ls/init.scm")
> ; (load "/usr/local/snd-ls/init.scm")
>
> at the command line it says:
>
> Compiling /tmp/fileCl5fI2.c
> /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld:
> /tmp/ccerLFbD.o: relocation R_X86_64_32 against `a local symbol' can not
> be used when making a shared object; recompile with -fPIC
> /tmp/ccerLFbD.o: could not read symbols: Bad value
> collect2: ld returned 1 exit status
>
>
> What should I do? Snd-ls launches but it isn't running as it should
> odviously.
>
Oops....
Does this work?:
export CFLAGS=-fPIC
/usr/local/snd-ls/snd-7/snd -noglob -noinit -l /usr/local/snd-ls/init.scm
by Kjetil Svalastog Matheussen <k.s.matheussen@notam02.no>
Dave Phillips
>
> Please tell me more about snd-rt and CM, I'm very interested.
>
Hmm, well, theres no special support in CM for snd-rt,but common music (at
least partly) can be loaded into SND, so you can use some of common musics
functionality to schedule realtime events and control various things.
I don't know CM very well though.
A little while back there was a thread about building Mellotron sound
fonts, but all the links posted in that thread are dead (searched via
Google). Does anyone know where these might be found? I've got this
great Mellotron VST plugin but it flat out refuses to work under any of
the Linux VST compatibility libraries (and the standalone version loads
under Wine, but it requires ASIO to produce any sound), so am looking
for something that will work under Linux.
-- Brett
-----------
Programmer by day, Guitarist by Night
http://www.chapelperilous.nethttp://www.alhazred.comhttp://www.revelmoon.com
*****************************************************************************
1.
Snd-ls v0.9.4.3
---------------
Released 30.6.2005
About
-----
Snd-ls is a distribution of the sound editor Snd. Its target is
people that don't know scheme very well, and don't want
to spend too much time configuring Snd. It can also serve
as a quick introduction to Snd and how it can be set up.
Changes from 0.9.3.0 to 0.9.4.3
--------------------------------
-Upgraded various rt-stuff.
-Upgraded various rt-stuff++
-Removed jack_set_server_dir guile-binding from rt-engine.scm, because its
removed from the newer versions of jack.
-Updated SND to v7.14 from 19.6.2005. Many important changes.
http://www.notam02.no/arkiv/src/snd/
*****************************************************************************
2.
Mammut V0.20
------------
Mammut will FFT your sound in one single gigantic analysis (no windows).
These spectral data, where the development in time is incorporated in
mysterious ways, may then be transformed by different algorithms prior to
resynthesis. An interesting aspect of Mammut is its completely
non-intuitive sound transformation approach.
Changes 0.18 -> 0.20
--------------------
-Fixed a bug in the Makefile caused by a fix in the previous release.
-Fixed some bugs in the Makefile.
http://www.notam02.no/arkiv/src/
*****************************************************************************
3.
Ceres V0.43
-----------
Ceres is an advanced program for displaying sonograms and for sound
effects in the frequency domain. And more.
Changes 0.42 -> 0.43
--------------------
-Fixed some bugs in the Makefile
http://www.notam02.no/arkiv/src/
*****************************************************************************
4.
Snd RT-extension documentation
-------------------------------
The realtime extension for SND makes it possible to do signal processing
in realtime using guile and a special scheme-like compiled language.
It has many features, as jack-support, CLM, a realtime scheduler,
a compiler, busses, dynamic patching, shared variables, ladspa and more.
It can also be made to work with Common Music.
http://www.notam02.no/arkiv/doc/snd-rt/
--