hi to the list,
has anybody being successful in building faad" on a debian-testing machine.
i tried several versions of it (2.2 and cvs2004), but all not works.
is there any experience about these issue here?
cheers,
doc
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I know this is not the most suited place to ask this, but I'm no
longer subscribed to the ALSA mailing list, so... I hope you can help me.
I have recently ran into a "problem" with my old emu10k1 card and its
mixer values... Using speaker-test I don't seem able to get proper 4+
channel support. What I get is simply the front stream being "cloned"
to the rear speakers I remember I had this working not too long ago,
but I don't remember how I did it or which options I had in alsamixer.
By the way this is a Sound Blaster Live! Value card, and physically
everything is connected properly.
TIA for any suggestions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.4 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFEwYjZXM+XOp70dwoRAua3AJ0U7XojykkYgGxOC8GoNMJwhjx3BgCfWPrw
Flbch7AmUGuqsM4+19BgPoI=
=1LCT
-----END PGP SIGNATURE-----
hi you all,
trying to compile faac, the file INSTALL says:
3. Run:
./bootstrap
./configure
make
make install
but my machine does not knows the command "bootstrap", so my question
is, does anybody knows in which package i can find this?
cheers,
doc
Hi all,
I've just finished another version of my bass synth plugin. Now
continuous controllers work (actual controller numbers are hardcoded for
now), with the possible exception of "Decay" which works backwards.
It's a feature, not a bug. Or is it?
http://www.gjcp.net/nekobee-0.1.5.tar.gz
Download, build and enjoy all that lovely squishy acidy goodness.
Please report any problems you have building or using it to me.
Gordon.
Hello all,
I've set up a mailing list for specimen:
http://zhevny.com/mailman/listinfo/specimen
Additionally the web site now lives at http://zhevny.com/specimen. This
is a minimal re-working of Pete's old site. More improvements to follow.
Let me know if anything is badly broken. (I know the guide is broken,
but I need to re-do it with new screenshots anyway.)
I just changed the dns record for zhevny.com to point to a new host
earlier today. The TTL was set to 1 day, so some of you may get pointed
to the old box. Let me know if you have any issues, or just try again a
little later.
Thanks,
Eric Rz.
hi to the list,
i just build ffmpeg from svn using this command:
./configure --enable-shared --enable-theora --enable-vorbis
--enable-libogg --enable-mp3lame --disable-static
all went good and i have now ffmpeg in /usr/local installed, but i am
wondering if something is wrong, cause lot of appis can not handle the
ffmpeg libs and wants not to compile.
xjadeo gives following error on make:
nowhiskey@murija2:~/software/nove/xjadeo/xjadeo-0.1.1$ make
make all-am
make[1]: Entering directory
`/home/nowhiskey/software/nove/xjadeo/xjadeo-0.1.1'
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT xjadeo.o -MD -MP -MF
".deps/xjadeo.Tpo" \
-c -o xjadeo.o `test -f 'xjadeo.c' || echo './'`xjadeo.c; \
then mv -f ".deps/xjadeo.Tpo" ".deps/xjadeo.Po"; \
else rm -f ".deps/xjadeo.Tpo"; exit 1; \
fi
In file included from /usr/local/include/ffmpeg/avutil.h:24,
from /usr/local/include/ffmpeg/avcodec.h:14,
from xjadeo.c:51:
/usr/local/include/ffmpeg/common.h:158:23: error: bswap.h: Datei oder
Verzeichnis nicht gefunden
In file included from /usr/local/include/ffmpeg/avcodec.h:14,
from xjadeo.c:51:
/usr/local/include/ffmpeg/avutil.h:29:17: error: log.h: Datei oder
Verzeichnis nicht gefunden
In file included from xjadeo.c:51:
/usr/local/include/ffmpeg/avcodec.h:671: error: syntax error before
'AVClass'
/usr/local/include/ffmpeg/avcodec.h:2026: error: syntax error before '}'
token
/usr/local/include/ffmpeg/avcodec.h:2036: error: syntax error before '*'
token
/usr/local/include/ffmpeg/avcodec.h:2037: error: syntax error before '*'
token
/usr/local/include/ffmpeg/avcodec.h:2038: error: syntax error before '*'
token
/usr/local/include/ffmpeg/avcodec.h:2039: error: syntax error before '*'
token
/usr/local/include/ffmpeg/avcodec.h:2046: error: syntax error before '*'
token
/usr/local/include/ffmpeg/avcodec.h:2384: error: syntax error before '*'
token
/usr/local/include/ffmpeg/avcodec.h:2429: error: syntax error before
'AVCodecContext'
...
configuring k3b, it says:
FFMpeg decoder plugin (decodes wma and others):
no
You are missing the ffmpeg headers and libraries
version 0.4.9 or higher.
The ffmpeg audio decoding plugin (decodes wma and
others) won't be compiled.
i already contacted the maintainers, but cause we dont really come
forward, i decide to ask here. there is no ffmpeg-config on my system, i
think you get it on debian only using the repository package.
mplayer compiled well and it is running.
if anyone has an idea what could be wrong, please response.
i decided to change my .deb package of jack against a svn self made
ones, that is why i am removing lot of packages from my system and
installing them myself.
cheers,
doc
hi to the list,
my neighbor gave me yesterday a suggestion that i should have a look on
the file /etc/ld.so.conf!
joe /etc/ld.so.conf:
/usr/X11R6/lib
# Begin qt addition to /etc/ld.so.conf
/opt/qt/lib
# End qt addition
# Begin qt addition to /etc/ld.so.conf
/opt/qt/lib
# End qt addition
# Begin qt addition to /etc/ld.so.conf
/opt/qt/lib
# End qt addition
# Begin qt addition to /etc/ld.so.conf
/opt/qt/lib
# End qt addition
# Begin qt addition to /etc/ld.so.conf
/usr/share/qt4
# End qt addition
on my system the dir /opt is empty, the qtlibs are in /usr/share/qt4/lib
and /usr/share/qt3/lib.
...qt4/lib is containing lot of files, but /qt3/lib contains only a few:
nowhiskey@murija2:/usr/share/qt3/lib$ ls
libqt-mt.prl libqt-mt.so libqt-mt.so.3 libqt-mt.so.3.3 libqt.so.3
libqt.so.3.3 libqui.prl libqui.so libqui.so.1 libqui.so.1.0
though in the .bash_profile there is a entry:
export QTDIR=/usr/share/qt3
export PATH=$QTDIR/bin:$PATH
all these ld.config stuff cant be o.k. like this.
was already running ldconfig, but no changes.
i would like the keep the qt3 path, cause making this entry in the
bash_profile made my machine able to compile much better.
so i suppose that i should change all the /opt/qt/lib entries into
/usr/share/qt3/lib?
perhaps anyone else here knows more about and can give me some support?
cheers,
doc
Hey,
The other day after a gig with my jazz trio, a lot of people kept
asking us whether we had a cd that we could sell to them.
So we got thinking, where could we get some studio time....
And then today i thought, i know! I'll ask on the LAU list!
Im sure some lovely friendly linux audio user person in the north of
England will let us come and do some recording!!
Being the poor student types, we dont have the money to purchase any
real time in a studio.
(and to be honest my studio just wont cut it at all, havent even
bothered re-installing jack after upgrading yet...)
So yes, anyone who is interested, please let us know!
We are based in Sheffield if that helps at all.
Any help is appreciated.
Chris
PS Just had a thought, we are mainly playing stuff from real books
(legal ones), is this ok to record and sell?
hi,
i am trying to remove from my system all the packages which are
depending of the jackd debian package, for being able to run jackd from
svn.
compiling timidity works, but timidity wonts not to start.
the distri version from timidity i used to start with "jacklaunch
timidity -ig".
now, starting the self-made timidity with the same command gives:
nowhiskey@murija2:~$ jacklaunch timidity -ig
/usr/local/share/timidity/timidity.cfg: No such file or directory
timidity: Can't read any configuration file.
Please check /usr/local/share/timidity/timidity.cfg
nowhiskey@murija2:~$
in /usr/local/share there is no timidity on my system:
nowhiskey@murija2:/usr/share$ whereis timidity
timidity: /etc/timidity /usr/local/bin/timidity
nowhiskey@murija2:
though there are so many additional options for building timidity.
perhaps someone is able to give me an example how to configure timidity
that it can be started with the command jacklaunch timidity -ig?
i tried already with this
./configure --enable-gtk --enable-xskin --enable-alsaseq
--with-default-output=jack
regards,
doc
