Linux-audio-user March 2018

linux-audio-user@lists.linuxaudio.org

47 participants
41 discussions

Teufel PC Bamster not getting connected on USB?

by David Kastrup

Hi, I just got some older Bamster soundbar model (probably not a keeper) that takes USB either for power (in which case it uses AUX in analog) or also as USB soundcard. In the latter case, however, it just switches itself off after a few seconds. dmesg is [ 1201.960192] usb 5-2: new full-speed USB device number 5 using uhci_hcd [ 1202.098273] usb 5-2: config 1 has an invalid interface number: 3 but max is 2 [ 1202.098278] usb 5-2: config 1 has no interface number 2 [ 1202.107265] usb 5-2: New USB device found, idVendor=10d6, idProduct=1100 [ 1202.107271] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1202.107276] usb 5-2: Product: USB Audio [ 1202.107280] usb 5-2: Manufacturer: ACTIONS [ 1203.326284] usb 5-2: 1:1: cannot get freq at ep 0x2 [ 1203.338528] usb 5-2: 3:0: cannot get min/max values for control 2 (id 3) [ 1203.344305] usbhid 5-2:1.3: can't add hid device: -71 [ 1203.344328] usbhid: probe of 5-2:1.3 failed with error -71 [ 1203.456336] usb 5-2: USB disconnect, device number 5 and if I am fast enough (before it switches itself off again), lsusb -v delivers Bus 005 Device 007: ID 10d6:1100 Actions Semiconductor Co., Ltd MPMan MP-Ki 128 MP3 Player/Recorder Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x10d6 Actions Semiconductor Co., Ltd idProduct 0x1100 MPMan MP-Ki 128 MP3 Player/Recorder bcdDevice 1.00 iManufacturer 1 (error) iProduct 2 (error) iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 135 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 40 bInCollection 1 baInterfaceNr( 0) 1 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0301 Speaker bAssocTerminal 0 bSourceID 3 iTerminal 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 3 bSourceID 1 bControlSize 1 bmaControls( 0) 0x03 Mute Control Volume Control bmaControls( 1) 0x00 bmaControls( 2) 0x00 iFeature 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 1 bDelay 0 frames wFormatTag 1 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 44100 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioControl Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 512 Decoded PCM samples Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 2.01 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 33 Warning: incomplete report descriptor Report Descriptor: (length is 1) Item(Main ): (null), data=none Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Device Status: 0x78a0 (Bus Powered) Any idea where I can go from here? It's annoying that it just powers itself off again, and the sound quality is supposed to be better when using sound via USB rather than AUX in. -- David Kastrup

6 years, 5 months

Soundcraft MTK22 + jack: first 16 channels silent

by Atte

I have an old problem (also posted in august) that I'l like some ideas how to solve. I have two computers, a laptop and a desktop box running identical setups: Debian stretch with 4.12.0-14.3-liquorix-686-pae kernel and jack version 1.9.10. On the laptop my mtk22 works perfectly, on the box the first 16 channels are silent. The laptop has two usb ports, one is blue (usb3 I guess) and one not blue (usb2 I guess), the mtk22 works with all 24 channels on both ports. The box has several usb ports, some build-in (usb2) and an usb3 PCI card I added. On all usb ports the first 16 channels of the mtk22 are silent. I'm led to believe that the problem is a software/configuration problem on the box, due to: 1) the box worked perfectly with the mtk22 when I ran debian 8 (jessie) 2) the box doesn't work even with the build in usb ports I'm suspecting "something" might be grabbing the first 16 channels of the mtk22 somehow, tried disabling pulseaudio (sudo chmod -x usr/bin/pulseaudio and rebooting), still doesn't work. Obviously I tried with several usb cables, the results are the same: the laptop works, the box doesn't. Any ideas how to approach this, pointers, things to check/try out would be greatly appreciated! I'm pretty lost... Thanks in advance! -- Atte http://atte.dk http://a773.dk

6 years, 5 months

Focusrite Novation

by Kirk Reiser

Hello folks: A friend lent me an analog to digital interface that shows up as Focusrite-Novation in lsusb. I am not finding it when I do arecord -l and wondered if anyone had experience with this device and might be able to advise me how to record the output of the device. It has two inputs that can be either quarter inch or XLR. I use nama as my DAW and have jackd installed but am not very familiar with recording from usb devices. Kirk -- Well that's it then, colour me secure! -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v1 mQENBFYV5DMBCAC060mbsnLhGPjnFkf0R0p+7MxcfxlOuy5wc8y59y9ZNF0RZD1s OTEsDih4vD9YJ3zA78VsBUDK47aiDWduh3nHzYN2ZSuxAQ9u7qPqphCG0jPagTU8 p7+Ceeya4I5odWtq+Nkf1UrHB7KKEtexphStSwUG5Bhi4bb84YinmX/a3I+OGV1D by4QBSdPvSuDw0qFkt/ucLyEwv4L6lDjoH2GF+tnCew4SJtliJFvA1k7NpWO6HW9 aWtBxfYU85ccZKBSE25y+9KprUCncVTpaVs3FztCWG0dQRXHvEbV+Damp/IBd9Jv HZX7azqbERUa/FjPTIlZhhI9VtaZaFfJSH+5ABEBAAG0HUtpcmsgUmVpc2VyIDxr aXJrQHJlaXNlcnMuY2E+iQE+BBMBAgAoBQJWFeQzAhsDBQkADS8ABgsJCAcDAgYV CAIJCgsEFgIDAQIeAQIXgAAKCRAHTEsk7UQUUoeuB/wIqsdLCfDrSvr3qg7rKBDg ru44OMuRit6hbdWFZjmxccCdjeNhBJRVd5wrEqjj5YoqQAhmacXaEB0DO/TZlDgo kUfJM7lrtQD4mYU9GVtrzJxCJoBUyeMVnMJt39F91tBu0mYM6oI/dv81dwxIv++4 hj55TZ4GG7DGYAy4LwNb+noNbivgOFHlnfNq8nxhZkHbJdYKP+sptZOL5sagmBQZ iS9STB54g/U7Jtt1Fe+JwDmbxQhbSHa9JuWn0xZ8CtYhrz06xSqZl5vpMlak3eW2 x6m6IcqZfyuI2K7W/9BCgcsQyYzufO4Gk9KyPNISskX6pFBLuNxIH6hdfxSYYm9y uQENBFYV5DMBCACtMyhHog5MR6eQUPTx7fWH5ntkgCtmWvQp4lcKj0HHbteDWglS NVbWKWEk9PAKA4UeQVUH4vOhTRhAPpuDUavLdp2tDtT7ZBVh91B3AWIM6+7fIvyU 2uYt1q/CNjga8RllXBT7mW2zHGEYQFIkBJvqlU0PN1HlxRZIbSSEb+zQuVAd+ph3 kt/oZon3ZbNmKg+arsYMmKkYJ0REwKQib7h5Xl31aK74XmWBp2Ky+lopsJSP8wpH AfC71h4s3LDm8ADHF1Ns4KuGZdLTugr8uiPm5kEJFGes1uYKy8R7OTFko0NEuJkv STfpPYnTU2qDCJBH08zZErI/6YBIlSsCSde3ABEBAAGJASUEGAECAA8FAlYV5DMC GwwFCQANLwAACgkQB0xLJO1EFFKAmgf/d3dk1/HgmF8rmvYVru/hJvmIpmiLqPl5 bYSwdZeU+k82qp3xACM2yMJhOh89SgHsaaqQAE1qo5rAJcSG7/+7M/kzf4u/WM/E unXDtLkbzi5Zl+gjoikrfOhgF0NmuGdlrOme8a6ue7+iE4XLAo0/jhVlh45O6Iq0 0DGyeFr22cR3jZj4wRmPw5zj4r/sWc06UfquVAEMmfIvJMaGYvwBI+TU6gI8MjLe VDY0vay/nQ79fXSLQmYEvjwKXIavQu9c8TFt0z9EDdoIMx69ZunqZuYQInxaT+cL i9zhihMGz4XA1q3blLNX3I0jWzAa23ZchI7htc3kfxp1jWqrGyGEIg== =nrPH -----END PGP PUBLIC KEY BLOCK-----

6 years, 5 months

[ANN] Vee One Suite 0.9.0 - The End of Winter'18 release

by Rui Nuno Capela

Ahoy there! The 'Vee One Suite' of so called 'old-school' software instruments, synthv1 [1] as a polyphonic subtractive synthesizer, samplv1 [2] a polyphonic sampler synthesizer, drumkv1 [3] as yet another drum-kit sampler and padthv1 [4] as a polyphonic additive synthesizer, are once again released just before the season ends. As before, all available in dual standard forms:<ul> - a pure stand-alone JACK client with JACK-session [5], NSM (Non Session management [6]) and both JACK MIDI and ALSA MIDI [7] input support; - a LV2 instrument plug-in [8]. The changes for this end-of-season goes as follows: - Introducing Scala micro-tuning classes, borrowed, stirred and refactored from original Nick Dowell's amsynth code, all under the GPL umbrella, of course. - An internal note-key/frequency indirection table is now in place, as a baseline for any micro-tuning implementations. - Whether to use native file browser/requester dialogs is now an effective option when launching under NSM session management (was once disabled initially). - Initializing and/or requesting a New blank preset doesn't open a sample file picker dialog anymore as it was more than nagging while under on NSM sessions. (applies to samplv1 [2] only). - Trying to get CC14 MSB+LSB (course+fine) running status on, no matter whether each pairing event are under 200ms apart. - A little hardening on the configure (autoconf) macro side. In order of (historical) appearance: **synthv1 - an old-school polyphonic synthesizer [1] ** synthv1 0.9.0 (end-of-winter'18) released! synthv1 is an old-school all-digital 4-oscillator subtractive polyphonic synthesizer with stereo fx. LV2 URI: http://synthv1.sourceforge.net/lv2 website: https://synthv1.sourceforge.io http://synthv1.sourceforge.net downloads: http://sourceforge.net/projects/synthv1/files - source tarball: http://download.sf.net/synthv1/synthv1-0.9.0.tar.gz - source package: http://download.sf.net/synthv1/synthv1-0.9.0-37.rncbc.suse.src.rpm - binary packages (openSUSE Tumbleweed): http://download.sf.net/synthv1/synthv1-0.9.0-37.rncbc.suse.x86_84.rpm - AppImage packages (JACK stand-alone only): http://download.sf.net/synthv1/synthv1-0.9.0-4.x86_64.AppImage git repos: http://git.code.sf.net/p/synthv1/code https://github.com/rncbc/synthv1.git https://gitlab.com/rncbc/synthv1.git https://bitbucket.org/rncbc/synthv1.git **samplv1 - an old-school polyphonic sampler [2]** samplv1 0.9.0 (end-of-winter'18) released! samplv1 is an old-school polyphonic sampler synthesizer with stereo fx. LV2 URI: http://samplv1.sourceforge.net/lv2 website: https://samplv1.sourceforge.io http://samplv1.sourceforge.net downloads: http://sourceforge.net/projects/samplv1/files - source tarball: http://download.sf.net/samplv1/samplv1-0.9.0.tar.gz - source package: http://download.sf.net/samplv1/samplv1-0.9.0-37.rncbc.suse.src.rpm - binary packages (openSUSE Tumbleweed): http://download.sf.net/samplv1/samplv1-0.9.0-37.rncbc.suse.x86_84.rpm - AppImage packages (JACK stand-alone only): http://download.sf.net/samplv1/samplv1-0.9.0-4.x86_64.AppImage git repos: http://git.code.sf.net/p/samplv1/code https://github.com/rncbc/samplv1.git https://gitlab.com/rncbc/samplv1.git https://bitbucket.org/rncbc/samplv1.git **drumkv1 - an old-school drum-kit sampler [3]** drumkv1 0.9.0 (end-of-winter'18) released! drumkv1 is an old-school drum-kit sampler synthesizer with stereo fx. LV2 URI: http://drumkv1.sourceforge.net/lv2 website: https://drumkv1.sourceforge.io http://drumkv1.sourceforge.net downloads: http://sourceforge.net/projects/drumkv1/files - source tarball: http://download.sf.net/drumkv1/drumkv1-0.9.0.tar.gz - source package: http://download.sf.net/drumkv1/drumkv1-0.9.0-33.rncbc.suse.src.rpm - binary packages (openSUSE Tumbleweed): http://download.sf.net/drumkv1/drumkv1-0.9.0-33.rncbc.suse.x86_84.rpm - AppImage packages (JACK stand-alone only): http://download.sf.net/drumkv1/drumkv1-0.9.0-4.x86_64.AppImage git repos: http://git.code.sf.net/p/drumkv1/code https://github.com/rncbc/drumkv1.git https://gitlab.com/rncbc/drumkv1.git https://bitbucket.org/rncbc/drumkv1.git **padthv1 - an old-school polyphonic additive synthesizer [4]** padthv1 0.9.0 (end-of-winter'18) released! padthv1 is an old-school polyphonic additive synthesizer with stereo fx padthv1 is based on the PADsynth algorithm by Paul Nasca, as a special variant of additive synthesis. LV2 URI: http://padthv1.sourceforge.net/lv2 website: http://padthv1.sourceforge.net https://padthv1.sourceforge.io downloads: http://sourceforge.net/projects/padthv1/files - source tarball: http://download.sf.net/padthv1/padthv1-0.9.0.tar.gz - source package: http://download.sf.net/padthv1/padthv1-0.9.0-4.rncbc.suse.src.rpm - binary packages (openSUSE Tumbleweed): http://download.sf.net/padthv1/padthv1-0.9.0-4.rncbc.suse.x86_84.rpm - AppImage packages (JACK stand-alone only): http://download.sf.net/padthv1/padthv1-0.9.0-4.x86_64.AppImage git repos: http://git.code.sf.net/p/padthv1/code https://github.com/rncbc/padthv1.git https://gitlab.com/rncbc/padthv1.git https://bitbucket.org/rncbc/padthv1.git Licence: The 'Vee One Suite' are free, open-source Linux Audio [10] software, distributed under the terms of the GNU General Public License (GPL) [9] version 2 or later. References: [1] synthv1 - an old-school polyphonic synthesizer http://synthv1.sourceforge.net/ [2] samplv1 - an old-school polyphonic sampler http://samplv1.sourceforge.net/ [3] drumkv1 - an old-school drum-kit sampler http://drumkv1.sourceforge.net/ [4] padthv1 - an old-school polyphonic additive synthesizer http://padthv1.sourceforge.net/ [5] JACK Audio Connection Kit http://jackaudio.org/ [6] NSM, Non Session Management http://non.tuxfamily.org/nsm/ [7] ALSA, Advanced Linux Sound Architecture http://www.alsa-project.org/ [8] LV2, Audio Plugin Standard, the extensible successor of LADSPA http://lv2plug.in/ [9] GNU General Public License http://www.gnu.org/copyleft/gpl.html [10] Linux Audio consortium of libre software for audio-related work http://linuxaudio.org See also: http://www.rncbc.org/drupal/node/1896 Enjoy && as always, have (lots of) fun ;) -- rncbc aka. Rui Nuno Capela

6 years, 6 months

IEM Music Residency Program 2019 - Call for Applications

by IOhannes m zmoelnig

IEM Music Residency Program 2019 - Call for Applications https://iem.at (sorry for cross-posting; please distribute) The IEM - Institute of Electronic Music and Acoustics - in Graz, Austria is happy to announce its call for the 2019 Artist-in-Residence program. The residency is aimed at individuals wishing to pursue projects in performance, composition, installation, sound art, development of tools for art production, and related areas. Individuals are asked to submit a project proposal that is related to the fields of artistic research of the IEM, as: * Algorithmic Composition * Algorithmic Experimentation * Audio-Visuality * Dynamical Systems * Experimental Game Design * Live Coding * Sonic Interaction Design * Spatialization/higher-order Ambisonics * Standard and non-standard Sound Synthesis Duration of residency: 5 months Start date: June 1st 2019 (negotiable) Monthly salary: approx. EUR 1100 (net) APPLICATION DEADLINE: 1st of May 2018 The Institute: The Institute of Electronic Music and Acoustics is a department of the University of Music and Performing Arts Graz founded in 1965. It is a leading institution in its field, with more than 35 staff members of researchers and artists. IEM offers education to students in composition and computer music, sound engineering, sound design, contemporary music performance, and musicology. It is well connected to the University of Technology, the University of Graz as well as to the University of Applied Sciences Joanneum through three joint study programs. The artwork produced at IEM is released through the Institute's own Open CUBE and Signale concert series, as well as through various collaborations with international artists and institutions. What we expect from applicants: - A project proposal that adds new perspectives to the Institute's activities and resonates well with the interests of IEM. - Willingness to work on-site in Graz for the most part of the Residency. - Willingness to exchange and share ideas, knowledge and results with IEM staff members and students, and engage in scholarly discussions. - The ability to work independently within the Institute. - A dissemination strategy as part of the project proposal that ensures the publication of the work, or documentation thereof, in a suitable format. This could be achieved for example through the release of media, journal or conference publication, a project website, or other means that help to preserve the knowledge gained through the Music Residency and make it available to the public. - A public presentation as e.g. a concert or installation, which presents the results of the Artist Residency. What we offer: - 24/7 access to the facilities of the IEM. - Exchange with competent and experienced staff members. - A desk in a shared office space for the entire period and access to studios including the CUBE [1], according to availability. - Extensive access to the studios of the IEM during the period from July 1st until end of September. - access to the IKOsahedron loudspeaker [2] - access to the “Autoklavierspieler” [3] - infrared motion tracking systems - Regular possibilities for contact and exchange with peers from similar or other disciplines. - Concert and presentation facilities (CUBE 24 channel loudspeaker concert space). - A monthly salary of approx. EUR 1100 net per month in addition to health and accident insurance. What we cannot offer to the successful applicant: - We cannot provide any housing. - We also cannot provide continuous assistance and support, although the staff is generally willing to help where possible. - We cannot host artist duos or groups, because of spatial limitations. - We cannot offer any additional financial support for travel or material expenses. An application form providing more information is available at https://residency.iem.at/ Feel free to contact residency(a)iem.at if you have any questions. [1] The Cube has a 24-channel loudspeaker system [2] http://iko.sonible.com/ [3] http://algo.mur.at/projects/autoklavierspieler

6 years, 6 months

AMD Raven Ridge

by Will Godfrey

Does anyone have any information about these units with regard to use under Linux? I know they've only be out officially for a couple of weeks, but I'm wondering how helpful AMD have been, and how much of the GPU side is usable - if any. -- Will J Godfrey http://www.musically.me.uk Say you have a poem and I have a tune. Exchange them and we can both have a poem, a tune, and a song.

6 years, 6 months

Re: [LAU] [Fwd: Re: netJack2: Master doesn't show up as readable/writable client on slave side]

by Jonas neuer

Hey Chris, thanks again for the explanation! Yep, I think I had a pretty big misunderstanding on how Jack worked... Right now the Pis HDMI is connected to a small screen with integrated speakers, later on this will be replaced by my stereo receiver. I've selected the proper device and confirmed its working locally on the Pi. I assumed on Windows when I select the proper device Jack would just take its stream as an input, but thats obviously wrong (I feel pretty stupid now for assuming that :D, but then again I was jsut focussed to much on the goal of getting all audio output from the Laptop to the Pi, basically making the Pi the Laptops default audio device) The thing is, on Windows I can't figure out how to tell any application to route its audio through Jack. For example in Audacity on the Pi I can select JACK instead of ALSA and all the Jack connections show up. On Windows I can only select MME, Windows Direct Sound and WASAPI (also tried installing ASIO, but that doesn't show up either.) And for Virtual Audio Cable (the thing I would need to get the audio from to make the Pi essentially my default audio device, since for most simple applications (browser, games etc) you can't even select the device, they just use the standart device (to which I can set the Virtual cable)) I don't even see a setting where I could put Jack. Best, Jonas

6 years, 6 months

netJack2: Master doesn't show up as readable/writable client on slave side

by Jonas neuer

Hey Everybody, I'm not really sure if this is the right place to ask my question, but I figured I'd give try. If this doen't fit in here please feel free to tell me so. I'm trying to route the audio output from my Windows 10 Laptop to the HDMI-out of my Raspberry Pi running Raspbian Strech. (Later on I want to run some fancy room correction filters on the Pi). For this I want to use netJack (version 1.9.11). On the Pi I start the Jack server via qjackctl and then run *jack_load netmanger* in the commandline. On the Win10 slave I run *jackd* *-R -d net* (with admin rights, just to be on the safe side). Judging from the console output they both find each other and connect just fine. (All the settings are left to their default values) Now when I want to set up the connection via the qjackctl gui on the master (the Pi) I can select the Laptop as readable client and as output socket in the patchbay. However on the slave the pi doesn't show up in the list. The only thing that shows up is one entry "system" as input socket/writable client. When I turn things around (just for testing) and make the laptop the master, then on the laptop I can find the pi as readable as well as as writable client (input and output socket, once each), however on the Pi (now slave) I cant find anything. Does anybody have an idea what could be the issue here? After hours of googleing I only find basic tutorials from which I've gotten the steps I'm doing, but none covers any troubleshooting... Best, Jonas The output from starting the server on the slave: PS C:\Program Files (x86)\Jack> ./jackd -R -d net jackdmp 1.9.11 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2016 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details Drivers/internals found in : C:\WINDOWS Drivers/internals found in : C:\WINDOWS JACK server starting in realtime mode with priority 10 self-connect-mode is "Don't restrict self connect requests" NetDriver started in async mode without Master's transport sync. Waiting for a master... Initializing connection with raspberrypi... **************** Network parameters **************** Name : Laptop Protocol revision : 8 MTU : 1500 Master name : raspberrypi Slave name : Laptop ID : 1 Transport Sync : no Send channels (audio - midi) : 0 - 0 Return channels (audio - midi) : 2 - 0 Sample rate : 48000 frames per second Period size : 1024 frames per period Network latency : 5 cycles SampleEncoder : Float Slave mode : async ****************************************************

6 years, 6 months

Anyone using a timer for taking breaks ?

by jonetsu

Hello, Anyone using a software timer to remind about taking punctual breaks ? If so, which one ? Cheers.

6 years, 6 months

Linux Audio Berlin meeting @ c-base 2018-03-07

by Daniel Swärd

Hi all. On Wednesday the 7th of March the monthly Berlin meeting is taking place at c- base. I'll as usual be in the mainhall from 20:00. See you there! :-) Cheers /Daniel

6 years, 6 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user March 2018