6 Mar
2003
6 Mar
'03
6:19 a.m.
Microphone 30 -16,000hz
2.2K Ohm
Could be the wrong impedance for your soundcard mic input. My mics are between
50-600 ohms, although I do use a mixer. Do you know this mic works for sure?
So is there a way to increase the micropnones gain?
with aumix settings
on full and shouting only pruduces a tiny amount of sound.
Bear in mind that using more gain on the soundcard input will probably cause
noise. Ideally you want the mic to have a fairly high level output so that
not much pre-amping is needed. This is where battery-powered condenser mics
come in handy.
Cheers
Daniel