Re: [LAU] CDRDAO - need help on new machine

Hi, I'm switching machines from Mandriva 2010.2 on a home built machine to Fedora 17 on a custom built machine. I'm running cdrdao version 1.2.3 on both machines. CDRDAO on the Mandriva machine works just fine, and the discs produced by it play in all sorts of audio and computer CD players. The command I used is 'cdrdao write contents.toc'. The burner on this machine is: /dev/sr0 : PIONEER , DVD-RW DVR-111D, 1.23 CDRDAO on the Fedora machine has trouble. The command I used is 'cdrdao simulate -v 3 --driver generic-mmc-raw contents.toc'. I added "--driver generic-mmc-raw" because cdrdao suggested it. I added "-v 3" to get some debugging output. The burner on this machine is: /dev/sr0 : PLEXTOR , DVDR PX-L890SA, 1.06 The debugging output is: Cdrdao version 1.2.3 - (C) Andreas Mueller <andreas(a)daneb.de> Format converter enabled for extensions: ogg Detected SG driver version: 3.5.27 Detected SG driver version: 3.5.27 /dev/sr0: PLEXTOR DVDR PX-L890SA Rev: 1.06 Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 0x0000) /dev/sr0: SCSI command Rezero Unit (0x01) failed: Bad address. /dev/sr0: SCSI command Rezero Unit (0x01) failed: Bad address. Starting write simulation at speed 16... Pausing 10 seconds - hit CTRL-C to abort. Process can be aborted with QUIT signal (usually CTRL-\). Turning BURN-Proof on Enabling JustSpeed. Using 96 byte raw P-W sub-channel data mode for CD-TEXT. Cue Sheet (variant 0): CTL/ TNO INDEX DATA SCMS MIN SEC FRAME ADR FORM 01 00 00 41 00 97 25 31 01 01 00 00 00 00 00 00 01 01 01 00 00 00 04 00 01 02 01 00 00 01 15 12 01 03 01 00 00 03 42 05 01 04 01 00 00 07 17 24 01 05 01 00 00 10 59 38 01 06 01 00 00 14 45 01 01 07 01 00 00 18 19 00 01 08 01 00 00 21 50 57 01 09 01 00 00 26 37 04 01 0a 01 00 00 29 30 00 01 0b 01 00 00 33 02 40 01 0c 01 00 00 36 13 68 01 0d 01 00 00 40 02 73 01 0e 01 00 00 44 30 25 01 0f 01 00 00 48 47 35 01 10 01 00 00 51 53 50 01 11 01 00 00 55 34 31 01 aa 01 01 00 59 17 30 Session format: 0 WARNING: No super user permission to setup real time scheduling. Waiting for reader process Buffer filled Awaken, will start writing Writing lead-in and gap... ERROR: Write data failed. ERROR: Simulation failed. /dev/sr0: SCSI command Rezero Unit (0x01) failed: Bad address. I've scoured the cdrdao-devel mailing list archives, which are quite thin after 2009. Anyone have any debugging advice? I've tried wodim via K3B in SAO mode, but that produces CDs which are unplayable on some of my audio CD players. Thanks.... -- Kevin _______________________________________________ Linux-audio-user mailing list Linux-audio-user(a)lists.linuxaudio.org http://lists.linuxaudio.org/listinfo/linux-audio-user