1 Feb
2005
1 Feb
'05
1:41 p.m.
Joe,
Thanks for the good tip. I disabled the on-board audio in BIOS and things
started working much better and consistently. l sure should have thought of
that but didn't! One more lesson learned...
I now have Audacity recording 8 tracks simutaneously. I still don't have
any control of source or input/output levels inside Audacity but can live
with this since it's all in "envy24controll". I need to get another monitor
so I can have all the control stuff, etc visible while Audacity is going
full screen.
It's only money... 8^)
Thanks again for the help. I still hope to try Ardour/Jack some day as
well.
Mike Jewell
ps Sorry for this late reply. Been having lots of problems with my mailer.
From: Joe Hartley <jh(a)brainiac.com>
Reply-To: A list for linux audio users
<linux-audio-user(a)music.columbia.edu>
To: A list for linux audio users <linux-audio-user(a)music.columbia.edu>
Subject: Re: [linux-audio-user] MAudio Delta 1010LT
Date: Wed, 26 Jan 2005 17:04:55 -0500
On Wed, 26 Jan 2005 12:27:46 -0800
"Mike Jewell" <msjmsj49(a)hotmail.com> wrote:
Everything worked fine with the built-in (stereo)
sound on my
motherboard.
I installed the 1010LT and rebooted. The
computer found the card and
seemed
to be happy with it.
But many things seem to be wrong.
I'm using envy24control to get the mixer, patchbay, sliders, etc.
Did you disable the onboard sound in the BIOS? If not, configuration
might get a little tricky. Reading the Planet CCRMA docs on configuring
alsa and looking at your .asoundrc file might come after that.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh(a)brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa