12 May
2007
12 May
'07
9:10 p.m.
2007/5/12, James <everamzah(a)gmail.com>om>:
i get:
g++ -c -o libraries/widgets/vgknob.o -fPIC -DPIC -g -O2 `pkg-config
--cflags gtkmm-2.4 cairomm-1.0` libraries/widgets/vgknob.cpp
libraries/widgets/vgknob.cpp: In member function 'virtual bool
VGKnob::on_expose_event(GdkEventExpose*)':
<snip>
</snip>
make: *** [libraries/widgets/vgknob.o] Error 1
any ideas?
Hi,
Sorry I have no time to put a patch toghether but just replace any
instance of cc->clear_path() with a cc->close_path()
Cheers,
-Giuseppe
On 5/12/07, Ken Restivo <ken(a)restivo.org> wrote:
which I
think I sent to Lars off-list, regarding a missing file, but after I
came up with an awful hack to get around that, it built and it works. Yay!
--
james/everamzah
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Thu, May 03, 2007 at 12:02:03PM +0200, Lars Luthman wrote:
to the
question I asked a while ago: is there a free-as-in-freedom B3 out
there?
I think your best bet right now is to get Elven
going (or maybe Ingen if
you don't need the GUI and the presets - you can still control the
parameters without it from Ingen's generic interface). But while AZR-3
is mostly done, at least sound-wise, Elven is highly unstable and will
probably not be future-compatible. Also, Euphoria is very much
unfinished - what you hear today is not what you will hear tomorrow.
It works with elven. AZR-3 sounds fantastic! I will consider it the answer
It's not perfect: it's not really using tonewheels, just slightly warped
sine waves. At some point I'm sure someone will just grab samples of the
some of the actual tonewheels on a Hammond, make wavetables of them, and
modify AZR-3 to use those. It's GPL so that's possible.
Its Leslie sounds as good to me as the TAP Rotary Speaker LASDSPA plugin,
and
seems to have less latency, too. It also has the speedup/slowdown code
and even an adjustment for belt tightness, which the TAP plugin lacks. Nice.
In a sense, this goes for all LV2 plugins and
hosts. While the
specification is now relatively stable, it's still not completely
finalised and things may still break without notice.
I built it using the recent slv2 release. There was one minor problem,
I will also try ingen, so as to get it going without a GUI, but elven was
much
easier to build than ingen.
It remains to be seen how (if) any of this runs on a 64-bit machine, but
I'll
try that next.
- -ken
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
iD8DBQFGRVloe8HF+6xeOIcRAoaGAJoDqsH92TVFWegWY0hEOpYU7RKedwCfbj6b
/eZHDyhEH4o9aN04rSgH5x0=
=nBj3
-----END PGP SIGNATURE-----
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org