Re: [linux-audio-user] 44.1, 48 or 96?

On Sun, 2005-09-11 at 20:32 -0500, Reuben Martin wrote: I had just another thought... In my last post, I suggested that you capture and process your work at 88.2, but it occurred to me that you're original question was more about comparing lower and higher sample rates. Your friend who suggested that you work directly at 44.1 may have a point, but it really depends on the quality of gear you'll have access to. Working at a higher sample rate is usually a good idea for several reasons. First, cheaper converters (< $1,500) generally sound better at higher sample rates due to extra filtering that goes on to reduce artifacts. (Note: this is not the case for top quality "audiophile" gear.) Secondly, if you're planning to send your mixes to a mastering house, then work at the highest sampling rate you possibly can and let them do the conversion. Believe it or not, many of the ultra-high end mastering studios bounce their final product to 1/2 inch two-track analog tape so they can recapture it a final time at 44.1. If the digital gear is top of the line and the tape machines are in great shape, this is probably the highest fidelity down-sampling conversion process on the planet. So the real question is this: what are you planning to do with your final product? Greg www.steeprockmedia.com