Re: [LAU] cpufreqd and no effect?

Hello everyone! Soory to harp on about it. But now cpufreqd is running and says, that it loaded the extra module powernow-k8 and it runs, ps -ax shows that. But I have no effect. /proc/cpuinfo always says 3000.0mHz. Find below my cpufreqd.conf, only special thing I did was to change the program based scheduling. Here's lsmod output: # lsmod Module Size Used by cpufreq_userspace 1488 0 cpufreq_conservative 7644 0 cpufreq_powersave 618 0 Kernel version is 2.6.38 (self-compiled) Distro: Debian (Squeeze) So what have I done wrong? I want my normal system to run at 800.0mHz, I know, that it can do it, it did before cpufreqd started working. I only want/need the full power, when heavy sound processing is in work. Where did I behave foolishly here? Warmly yours Julien *** /etc/cpufreqd.conf # this is a comment # see CPUFREQD.CONF(5) manpage for a complete reference # # Note: ondemand/conservative Profiles are disabled because # they are not available on many platforms. [General] pidfile=/var/run/cpufreqd.pid poll_interval=2 verbosity=4 enable_remote=1 remote_group=root [/General] [acpi] acpid_socket=/var/run/acpid.socket [/acpi] #[nforce2_atxp1] #vcore_path=/some/path #vcore_default=1500 #[/nforce2_atxp1] [sensors_plugin] sensors_conf=/etc/sensors3.conf [/sensors_plugin] [Profile] name=On Demand High minfreq=50% maxfreq=100% policy=ondemand [/Profile] # [Profile] name=On Demand Low minfreq=20% maxfreq=50% policy=ondemand [/Profile] [Profile] name=Performance High minfreq=100% maxfreq=100% policy=performance #exec_post=echo 8 > /proc/acpi/sony/brightness [/Profile] [Profile] name=Performance Low minfreq=20% maxfreq=20% policy=performance [/Profile] [Profile] name=Powersave High minfreq=60% maxfreq=60% policy=powersave [/Profile] [Profile] name=Powersave Low minfreq=40% maxfreq=40% policy=powersave [/Profile] [Profile] name=Conservative High minfreq=33% maxfreq=100% policy=conservative [/Profile] # [Profile] name=Conservative Low minfreq=0% maxfreq=66% policy=conservative [/Profile] ## # Basic states ## # when AC use performance mode [Rule] name=AC Rule ac=on # (on/off) profile=Performance Low [/Rule] # stay in performance mode for the first minutes #[Rule] #name=AC Off - High Power #ac=off # (on/off) #battery_interval=70-100 ##exec_post=echo 5 > /proc/acpi/sony/brightness #profile=On Demand Low #[/Rule] # conservative mode when not AC #[Rule] #name=AC Off - Medium Battery #ac=off # (on/off) #battery_interval=30-70 #exec_post=echo 3 > /proc/acpi/sony/brightness #profile=Powersave High #[/Rule] # conservative mode when not AC #[Rule] #name=AC Off - Low Battery #ac=off # (on/off) #battery_interval=0-30 #exec_post=echo 3 > /proc/acpi/sony/brightness #profile=Powersave Low #[/Rule] ## # Special Rules ## # CPU Too hot! [Rule] name=CPU Too Hot sensor=temp1_input:65-100 cpu_interval=50-100 profile=Performance Low [/Rule] # use performance mode if I'm watching a movie # I don't care for batteries! # But don't heat too much. [Rule] name=Sounder programs=nama,linuxsampler,zynaddsubfx,beatrix,csound battery_interval=0-100 acpi_temperature=0-60 cpu_interval=0-100 profile=Performance High [/Rule] =-=-=-=-=-=-=-=-=-=-=-=- Such Is Life: Very Intensely Adorable; Frightening Absence Just Arriving, Reigns Disappeared, Ornate - flowers! ====== Find my music at ====== http://juliencoder.de/nama/music.html ..................................... "If you live to be 100, I hope I live to be 100 minus 1 day, so I never have to live without you." (Winnie the Pooh)