14 May
2013
14 May
'13
7:27 p.m.
On Tue, 14 May 2013 19:09:36 +0200 (CEST)
Julien Claassen <julien(a)mail.upb.de> wrote:
Hello everyone!
I'm considering to get a Behringer BCR2000 to control some software. Now
I've seen the bcx2000 software, which naturally is graphical.
So my question: how do you see my chances of creating my own configurations?
Is the SysEx sent by the Behringer small and structured enough, that I could
try hacking it directly in a hex-editor? I've recently done some
header-hacking of other SysEx files and found it not as unpleasant as I
imagined.
Hi, Julien! It all seems pretty straightforward enough at the sysex
level, I can send you a config file from my BCF if you'd like. I did
not use any of the GUI tools to change the config on mine; I either
saved or loaded a config file with amidi, and if I needed to change what's
in the BCF, I did it by twiddling the knobs and setting it on the BCF,
then I saved the config to a file. I'm sure editing a config file and
loading it up would work if you're comfortable enough with a hex editor.
Looking at a file now, it seems easy enough as all the labels appear to
be in English and not encoded in any form.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh(a)brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa