5 Jan
2006
5 Jan
'06
7:50 p.m.
On Thursday 05 January 2006 21:49, Laura Conrad wrote:
Hi Laura. Are you using the onboard soundcard? Perhaps you could disable it,
either in the BIOS, or from jumpers on the MOBO as I have done. It might help
to remove potential problems, as I see both cards are using irq9. This may or
may not be causing a problem, but if you just have your Audigy card enabled,
at least you are only dealing with that card. Nigel.
>>>> "NH" == Nigel Henry <cave.dnb(a)tiscali.fr> writes:
NH> Hi Laura. I may be going down the wrong road here, but it appears
you have 2 NH> cards. The one on the MOBO, and the Creative one.
NH> Do you have them both set up to speakers?
No, only on the SBLive.
NH> If so. Are you sure that when you are getting sound output,
NH> thats it's through the Creative card, and not the onboard
NH> one.
When I run Timidity, or other sound apps, it comes out the speakers
attached to the SBLive.
NH> Please run. cat /proc/asound/cards to see what order your
NH> cards are being loaded, and post it .
[tmp]# cat /proc/asound/cards
0 [Live ]: EMU10K1 - SBLive! Platinum [CT4760P]
SBLive! Platinum [CT4760P] (rev.5, serial:0x80401102)
at 0xc000, irq 9 1 [rev21 ]: VIA686A - VIA 82C686A/B rev21
VIA 82C686A/B rev21 with AD1881 at 0xd000, irq 9
NH> Do you have Qjackctl installed (the front end to Jack) ? If not,
I'd suggest NH> installing it, as you can play with a lot of settings. If
so. Have a look in NH> "Settings" and the box marked Interface. Compare the
HW # with the card NH> number for the Creative card from cat
/proc/asound/cards.
Both 0.