29 Jan
2013
29 Jan
'13
9:31 a.m.
Bill Allen wrote:
when I hooked the FCB1010 midi in to the UM-2 midi
out, the FCB1010
goes into error mode. This happens with every one of the edirol
devices.
Does this happen *before* you try to actually use the FCB1010?
What differentiates Roland devices from most other MIDI interfaces is
that they send Active Sense messages. The FCB1010 manual says this is
supported, and in any case these should be ignored if unsupported, but
one can never know how buggy the firmware is.
Regards,
Clemens