[LAU] Jconvolver on Raspberry Pi

Hello, I'm new to all of this. I'm trying to make FIR convolution on a Raspberry Pi 2. I have succeeded in making Jack2 working (Playback only, no full duplex). My alsa player can connect to Jack2 and jack2 to the hw I2S sound card, Fine. Now, this is what I'm trying to acheive : Start Jack2 (with jconvolver as input and I2S soundcard as output) Start jconvolver and Connect it to Jack2 Start Alsaplayer and Connect it to jconvolver as the audio input Here is my asound.conf /# convert alsa API to jack API # use it with: # % aplay foo.wav # pcm type jack pcm.rawjack { type jack playback_ports { 0 system:jconv_1 1 system:jconv_2 } capture_ports { 0 system:capture_1 1 system:capture_2 } } # jackplug pcm.jack { type plug slave { pcm "rawjack" } hint { description "JACK Audio Connection Kit" } } # use following peripherical by defaut with alsa: pcm.!default { type plug slave { pcm "rawjack" } }/ Here is my jconvolver config file: jconvolver filter-44100.conf /# Replace by whatever required... # /cd /root/folve/filter # # # in out partition maxsize density # -------------------------------------------------------- /convolver/new 2 2 256 204800 0.5 # # # num port name connect to # ----------------------------------------------- /input/name 1 jconvolver /input/name 2 jconvolver # /output/name 1 jconv_1 /output/name 2 jconv_2 # # # in out partition maxsize # --------------------------------------------------------------- /convolver/new 2 2 1024 65536 # in out gain delay offset length chan file # -------------------------------------------------------------------------- /impulse/read 1 1 0.75 0 0 0 1 T-Monacor_SPH30X.wav /impulse/read 2 2 0.75 0 0 0 1 T-Monacor_SPH30X.wav / When I start jconvolver, I get the following error : *Can't initialise convolution engine.* Thank you all for any tweak, Jean -- View this message in context: http://linux-audio.4202.n7.nabble.com/Jconvolver-on-Raspberry-Pi-tp98952.ht… Sent from the linux-audio-user mailing list archive at Nabble.com.