15 Apr
2013
15 Apr
'13
10:40 a.m.
Hello Jeremy,
2013/4/15 Jeremy Jongepier <jeremy(a)autostatic.com>om>:
--
Carlos sanchiavedraz
* Musix GNU+Linux
http://www.musix.es
On 04/15/2013 10:14 AM, Carlos sanchiavedraz wrote:
Just a USB cable from RPi to an A/C to USB adapter, and UA25EX
connected direct to the USB on RPi.
Hello again.
I've done some testing with Raspbian following the great wiki
mentioned at the begining fo this thread[1].
After some configuration (overcloking (just Modest mode at 800MHz, run
optimization script... but no Jack for the moment) I tried to connect
an UA25EX (UA25 newer version) but It failed the first time, it
rebooted itself, and then it kept rebooting all the time.
Hello Carlos,
Seems like the UA-25EX is drawing too much current. What kind of power
supply are you using? It corrupted
IIRC, when configuring using raspi-config, the Modest preset for
overclocking just increases the CPU freq from 700MHz to 800MHz. I
didn't want to risk my SD because I red that issue you mention, but it
seems that anyway I've left without my SD.
Thanks, Jeremy.
the 2GB SD, now I cannot even format and start all over again (the
system doesn't recognize or mount it).
I think Jeremy and someone else have an UA25, did something like this
happened to you?
Yes, that's why I'm now using a powered USB hub and I plug the UA-25 into
the hub. The hub has a 5V/3.7A power supply. In my case I also experienced
SD corruption when using a GPU frequency higher than 250.
Regards,
Jeremy
I've been using my RPi with Raspbian and RasBMC (this I think it has
800MHz configured by default) for some time now, and all went ok and
never corrupted the SD card even having several reboots in this time.
(Maybe I'll have to buy another SD card and try that 8GB image made
for Pure Data)
Regards.
[1]http://wiki.linuxaudio.org/wiki/raspberrypi
-- Carlos sanchiavedraz
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user