6 Apr
2005
6 Apr
'05
7:42 a.m.
peter plessas wrote :
I have now tested alsa-drivers-1.0.9rc1 with hotplug
support in the
kernel, but without success. When i boot into OSX, load the firmware
there, and do a warm-reboot into debian, the card works, even
reinserting and putting the computer into sleep mode doesn't stop the
card from working.
But after a coldboot into debian, the card remains uninitialized, giving
the same error as described below.
(...)
>>
>>peter:~# hdsploader
>>hdsploader - firmware loader for RME Hammerfall DSP cards
>>Looking for HDSP + Multiface or Digiface cards :
>>Card 0 : PowerMac Screamer Rev 0
>>Card 1 : RME Hammerfall DSP at 0xf3000000, irq 58
>>Upload firmware for card hw:1
>>Hwdep ioctl error on card hw:1 : Input/output error.
>>
>>I am using debian testing, running a 2.6.8 kernel with manually compiled
>> 1.0.8 alsa drivers on a G3 powerpc laptop.
>>
>>cardbus version is 11 (rev 0b)
>>
>>the card is loadable out of osx.
>>
Hi Peter,
I would need a little more information.
Could you please post the output of 'dmesg | grep Hammerfall', and
verify to be sure the alsa version your kernel is running
(cat /proc/asound/version).
Are your drivers compiled in kernel or as modules ?
Thomas