Re: [LAU] Jack-hardware bridging issue

Hi, thanks, it's the "linphone-daemon" of Linphone 4.1.1 which registers with an Asterisk server on the same machine. The Linphone desktop app itself does access the PulseAudio sink in Jack with no problems. However I'm needing to use the linphone-daemon to which I'm sending commands with shell scripts via a Unix socket. I'm running the daemon with a configuration file, eg. linphone-daemon --config .linphonerc --pipe linphone.soc It's reading the config, although it seems to ignore the part which should specify the cards used for playback, capture and ring tone. I should add that I've found no documentation for linphone-daemon other than its help file and I'm using the config format for the preferences file of earlier versions of Linphone. Version 4.1.1 seems to save its preferences in binary, at least I've not found a text, with a good deal of searhcing. I wrote a day ago to the linphone developers list about this. Until now I've received no reply. I suspect that audio device selection is not implemented in the daemon and in which case, I'd like to try some sort of bridging to get the audio into Jack (i need to run both the phone daemon and SuperCollider though the same sound card and SC only runs with Jack) Here's the relevant part of the config: [sound] playback_dev_id=2 ringer_dev_id=2 capture_dev_id=3 echocancellation=1 mic_gain_db=0.000000 remote_ring=/usr/share/sounds/linphone/ringback.wav playback_gain_db=0.000000 local_ring=/usr/share/sounds/linphone/rings/orig.wav I built the linphone apps from this source: https://gitlab.linphone.org/BC/public/liblinphone Em 01/04/2020 10:50, Chris Caudle escreveu: