Re: [LAU] Audio interface latency measurements

On Sat, 21 Jun 2014, Robert Jonsson wrote: As was already stated, clock speed of the interface is not really relevant. It seems in fact that no one is really interested in USB3 because it does not have any improvement for audio, USB2 is enough. The limitation with USB1 is bit depth, bit rate and channel count. In general, throughput and latency are two different things. Larger packets mean better throughput, but smaller packets mean lower latency. I am not sure, but it seems to me the USB1.1 audio standard effectively means that the lowest latency for USB1 is jackd set to 64/2. This is the smallest buffer size supported. I do not know, but it seems that fire wire audio is about the same from what I have read (I don't have one of my own to confirm). The main trouble with USB is on the MB. Finding a USB port that is not shared with something else via an internal hub. I think adding a USB card would make things better, but trying different ports on a laptop gives good results too. With any audio interface, having it's own irq is important, I have moved PCI cards to different slots with a big difference. It shouldn't be, but it seems tunning a computer for audio is a must still for low latency. Audio is very definately _not_ plug and play for (semi)pro audio work. There is no silver bullet kernel or distro that just makes everything work. On my laptop, there is one USB port that gives good audio... so long as the port next to it is empty... and the wireless kernel module is unloaded and .... you get the picture :) -- Len Ovens www.ovenwerks.net