4 Oct
2009
4 Oct
'09
3:39 p.m.
On Sun, Oct 04, 2009 at 10:39:15AM +0200, Nick Copeland wrote:
If you are going to put velocity curves on the
controller itself then you are going to lose
responsiveness, no? Midi only supports a 7 bit velocity: if the curve is on the
controller
then a non-linear curve implies some of the 127 values have to be duplicated and some
will not be used - that implies you have lost sensitivity in the touch response.
That would be true only if you start with just 127 values.
The actual measured value will probably have much better
resolution.
Ciao,
--
FA
Io lo dico sempre: l'Italia รจ troppo stretta e lunga.