27 Jun
2014
27 Jun
'14
5:12 p.m.
On gio, 2014-06-26 at 09:11 +0200, Jeremy Jongepier wrote:
On 06/26/2014 01:37 AM, Wayne DePrince Jr. wrote:
though i mainly work at 48 kHz/24 bit, it works fine at 96/24 as
well with my Editorl FA-66. however, it appears my controller is not
VIA but TI:
04:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev
03)
05:00.0 FireWire (IEEE 1394): Texas Instruments XIO2200A IEEE-1394a-2000 Controller
(PHY/Link) (rev 01)
while we are on the topic, does anyone know of a non-Apple laptop
(current or old) that has a powered Firewire 400 6 conductor port?
though the StarTech ExpressCard solution works well and provides 2x 6
conductor ports, the physical ExpressCard connection is sensitive to
vibration/movement and is easily dislodged. also, since it does not
provide power via the FireWire ports, i need to also carry around the
FA-66's power brick.
peace, w
http://www.startech.com/Cards-Adapters/FireWire/2-Port-ExpressCard-1394a-Fi…
only problem is the previously mentioned problem with hot-plugging (i.e.
where the card must be in the laptop at boot up). otherwise works
great.
peace, w
http://subversion.ffado.org/wiki/HostControllers#VIA
So does it also work at 88.2kHz and higher for you?
Jeremy