4 Feb
2005
4 Feb
'05
5:34 p.m.
Hi all,
This is my first post to the list and I'm still pretty much a newb, so
go gently... :-)
I have an Audigy2 Platinum Pro ZS card that I would like to use for 6
channel input and output work. I am using JACK (0.99.49) via the
QJackCtl (0.2.14) frontend. I've installed ALSA 1.0.8 with Lee's
emu10k1 multichannel v0008. I am running a pretty much stock, up to
date FC3 distro using kernel 2.6.10 with the realtime-lsm kernel module
installed so I have realtime privileges for jackd.
/proc/asound/devices:
4: [0- 0]: hardware dependent
9: [0- 1]: raw midi
8: [0- 0]: raw midi
19: [0- 3]: digital audio playback
18: [0- 2]: digital audio playback
26: [0- 2]: digital audio capture
25: [0- 1]: digital audio capture
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
0: [0- 0]: ctl
1: : sequencer
6: [0- 2]: hardware dependent
10: [0- 2]: raw midi
11: [0- 3]: raw midi
33: : timer
All software seems to be working properly. My problem is that I cannot
figure out how to configure my 6 desired capture channels so that I can
read signals on the L & R channels of my 3 Line In inputs. I just think
I have a configuration problem Any and all help greatly appreciated.
Here is the PCM device definition from my .asoundrc file (which is a
modification of the example file found on the included reference webpage):
################################################################################
#
# 5.1 Channel Surround Sound
#
# Reference information:
# http://alsa.opensrc.org/index.php?page=SurroundSound
ctl.jack51 {
type hw
card 0
}
pcm.jack51 {
# "asym" allows for different handling of in/out devices
type asym
playback.pcm {
# # route for mmap workaround
type route
slave.pcm surround51
# # Had to switch all L and R Channels to conform playback
# # channels within JACK to standard 5.1 channel mapping.
# # The trailing 1's indicate unity gain (valid values are 0.0-1.0)
ttable.0.1 1 # routes 0 to 1 (playback_1 [0] to output
channel 1 [1])
ttable.1.0 1 # routes 1 to 0 (playback_2 [1] to output
channel 0 [0])
ttable.2.3 1 # routes 2 to 3 (playback_3 [2] to output
channel 3 [3])
ttable.3.2 1 # routes 3 to 2 (playback_4 [3] to output
channel 2 [2])
ttable.4.5 1 # routes 4 to 5 (playback_5 [4] to output
channel 5 [5])
ttable.5.4 1 # routes 5 to 4 (playback_6 [5] to output
channel 4 [4])
}
capture.pcm {
# # 2 channels only
type hw
card 0
}
}
################################################################################
Using this "pcm.jack51" from within QJackCtl (equivalent to. jackd -R
-dalsa -d jack51 -S) I get 2 Capture channels (which both appear to
contain the R channel of Line In #1) and 6 playback channels (which are
correct). BTW, I can use my jack51 PCM from within QJackCtl because I
edited the "Interfaces" menu via the qjackctlrc file so that I have a
"jack51" menu option. Once JACK is started, channel interconnectivity
works correctly. How do I write the "capture.pcm" part of my .asoundrc
file so that all 6 inputs become capture channels in JACK?
I've done loads of reading on customizing a .asoundrc file and have
tried many permutations in attemting to configure my Audigy2's 6 input
channels, but no luck so far... There seems to be a good deal of
information for configuring ALSA for *playing* audio, but not so much
for *capturing* audio!
Does anyone have any experience with this that I could draw on and would
be willing to help? Other questions: Is this supported for my hardware
yet? Any recommendations for multichannel (at least 6 in & out) cards
that are currently well supported?
Thanks in advance for any assistance. I can post more detailed info as
needed.
-Rick