[LAU] Focusrite Scarlett 2i2 no playback (jack/pa)

Hi list, I recently bought a focusrite Scarlett 2i2. I already had a look at http://linuxmusicians.com/viewtopic.php?f=27&t=10055&start=30 and first asked there, without success. So I am reposting it here, with hope that someone has ideas how to get it running. Capturing works out of the box. But I did not get the playback running. Here my Systeminfo: uname -a Linux workstation 3.9.0-030900rc8-generic #201304211835 SMP Sun Apr 21 22:35:53 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux lsmod | grep snd_usb_audio snd_usb_audio 147350 2 snd_usbmidi_lib 29477 1 snd_usb_audio snd_hwdep 13613 2 snd_hda_codec,snd_usb_audio snd_pcm 102477 7 snd_hda_codec_hdmi,snd_ice1712,snd_hda_intel,snd_ac97_codec,snd_hda_codec,snd_usb_audio,snd_rme96 snd 69533 41 snd_hda_codec_hdmi,snd_ice1712,snd_hda_codec_via,snd_ak4xxx_adda,snd_cs8427,snd_hda_intel,snd_ac97_codec,snd_hda_codec,snd_usb_audio,snd_rme96,snd_usbmidi_lib,snd_i2c,snd_hwdep,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device lsusb Bus 002 Device 002: ID 1235:8006 Novation EMS nano /etc/modprobe.d/focusrite-scarlett options snd_usb_audio vid=0x1235 pid=0x8006 device_setup=0xf index=4 enable=1 aplay -l && arecord -l **** List of PLAYBACK Hardware Devices **** card 0: PAD [RME Digi96/8 PAD], device 0: Digi96 IEC958 [Digi96 IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PAD [RME Digi96/8 PAD], device 1: Digi96 ADAT [Digi96 ADAT] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: SB [HDA ATI SB], device 0: VT2020 Analog [VT2020 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: SB [HDA ATI SB], device 2: VT2020 Alt Analog [VT2020 Alt Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: SB [HDA ATI SB], device 3: VT2020 Digital [VT2020 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: M1010LT [M Audio Delta 1010LT], device 0: ICE1712 multi [ICE1712 multi] Subdevices: 1/1 Subdevice #0: subdevice #0 card 3: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 3: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 4: USB [Scarlett 2i2 USB], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 **** List of CAPTURE Hardware Devices **** card 0: PAD [RME Digi96/8 PAD], device 0: Digi96 IEC958 [Digi96 IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PAD [RME Digi96/8 PAD], device 1: Digi96 ADAT [Digi96 ADAT] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: SB [HDA ATI SB], device 0: VT2020 Analog [VT2020 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: SB [HDA ATI SB], device 2: VT2020 Alt Analog [VT2020 Alt Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: M1010LT [M Audio Delta 1010LT], device 0: ICE1712 multi [ICE1712 multi] Subdevices: 1/1 Subdevice #0: subdevice #0 card 4: USB [Scarlett 2i2 USB], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 jack only runs at 48kHz with 512 Frames and higher. Non realtime, no memory restriction, Duplex I tested the playback with Pulseaudio and Jack, neighter worked. Does anyone have a clue, what I am missing? Regards Ck