20 Dec
2018
20 Dec
'18
8:14 p.m.
Okay ... good news! Got it all working. And, even better ... I think I
might know what's going on (maybe not).
Hooked the same stuff up today. Presonus Audiobox USB with 2 mic inputs,
microphone and phones. Now, this time I did one thing first: I turned the
inputs in pulse for the audiobox OFF. Then I launched "pasuspender
audacity". Did a few tests and all works fine. Even changed the input from
44100 to 48000 and back a few times, worked fine on either setting
(assuming that Audacity sets the interface correctly?).
I think the key is to disable the pulse stuff and that a conflict between
the 2 was screwing things up. But, I *thought* that pasuspender was
supposed to do that?
Only one more issue is that I can't adjust the gain in audacity for the
mic. Seems to be a very low signal ... might have to run it though an amp
or mixer anyway, but amplifying it after recording seems to be fine.
Thanks for the suggestions!
On Wed, Dec 19, 2018 at 8:46 AM David Kastrup <dak(a)gnu.org> wrote:
"Chris Caudle" <chris(a)chriscaudle.org>
writes:
--
**** Listen to my FREE CD at http://www.mellowood.ca/music/cedars ****
Bob van der Poel ** Wynndel, British Columbia, CANADA **
EMAIL: bob(a)mellowood.ca
WWW: http://www.mellowood.ca
This looks odd:
On Tue, December 18, 2018 5:17 pm, Bob van der Poel wrote:
That could actually be related to the problem: maybe the chipset
supports an IEC958 input and selecting this combination synchronizes the
chipset to the non-existing input.
--
David Kastrup
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user
In the pavucontrol program the audiobox shows and
I select
Analog Stereo Output + Digital Stereo (IEC958) Input
Any idea why shows digital input and not analog stereo input? I just
found a picture of a PreSonus Audiobox, appears pretty simple, no digital
input at all, at least on the external controls nothing to set sample
rate. Only software controls for setting the sample rate I presume?