Re: [LAU] Music Made with Linux: The Infinite Repeat - Money or Love (DJ AutoStatic Remix)

Dear all, This is actually the very first track I made with Linux. Recently I listened to it again and felt this track deserved some more attention so I decided to remix it. Originally this track was made with LMMS and I recorded the vocals with Qtractor. I kept the vocals and parts of the drumsamples and I also stuck with the bass line for the verse and some of the effects. So I loaded all the samples into Hydrogen, recorded all MIDI patterns with seq24 and inserted the plug-ins I wanted to reuse into Qtractor. Well, that was my intention actually. I ended up rerecording guitar parts and added quite some extra samples. Also the number of synths steadily grew during the process, same for the amount of plug-ins I used. This is what I came up with, just freshly ran through LinuxDSP's MBC2 (it's an electro-ish track so I compressed the hell out of it): http://theinfiniterepeat.com/music/the_infinite_repeat_-_money_or_love_(dj_… Stuffs used: * Yoshimi Analogue Bass running through a C* Pre-amp and the Crossover Distortion plug-in * Yoshimi Dubstep (custom patch), I did the cut-off live with an Akai MPK Mini * amSynth Synth Strings 1 patch * SO-666 Feedback Drone LV2 plug-in (LOVE THIS ONE!!! Thanks for this plug-in Jeremy Salwen!!) * WhySynth DragonPurr * MDA Vocoder + Yoshimi Hard Synth * All guitars (Fender Tele and OLP Music Man) done with Guitarix and the Redwirez IR Library (http://www.redwirez.com/free1960g12m25s.jsp?ref=home) * Lots and lots of Calf Compressors and I think every track (about 20) has a different reverb plug-in (TAP, FreeVerb). I also used quite some Calf Vintage Delays for the guitars and the SO-666. And 2 or 3 Calf Phasers. Oh yeah, and the SC3 plug-in to duck the SO-666. * Most drum samples are from the LMMS sample set, I decided to re-use those. The crashes are from the GSCW2 Hydrogen kit. * Last but not least, I added a little Glockenspiel in the bridge. First I wanted to use the Glockenspiel of the SSO library but that specific set of samples is not so great so I drove to our rehearsal room to pick up our drummer's little Glockenspiel, mic-ed it with the first mic I could find (an AT2020) and got it on hdd within a few minutes. Basically I used Qtractor as a mixer, Hydrogen to host the samples and seq24 for the MIDI patterns and automation of Qtractor. Works like a charm. Hope you like it. Feedback is always appreciated! Best, Jeremy