1 Jul
2004
1 Jul
'04
7:48 a.m.
This will be my only Linux machine, although I am sure more will follow.
I could prototype it, but I was hoping to get a good steer from current
users.
Thanks for the steer on soundcards.
I want 1/4" in and posssibly stereo out. Input from a wireless link from a
bass guitar. Could be balanced in, but would llike unbal as well, same for
output. You are right about USB - not really.
I want to use a pedal board to control it, possibly midi, or with a
digital/analogue IO card. I also have thoughts of using as a synth.
Raises another question - anyone writen a good pitch tracker (thinking
driving synth from audio input).
--
Veronica Merryfield, somewhere in Cambridgeshire, UK
----- Original Message -----
From: "Daniel James" <daniel(a)mondodesigno.com>
To: "A list for linux audio users" <linux-audio-user(a)music.columbia.edu>
Sent: Thursday, July 01, 2004 9:52 AM
Subject: Re: [linux-audio-user] moterhboard and sound card advise
I am planing
on putting together a rack unit to use as an effects
processor.
For a sound card I was thinking of
creative audigy2 or is this over kill?
It really depends on the kind of instrument/microphone output and
mixer input you intend to use. You might want balanced XLR inputs and
outputs in a rack unit, mic preamps, or 1/4" jack plugs for an
instrument like a guitar. In that case you could use something like
an M-Audio Delta 1010LT. A DJ could use unbalanced RCA (aka phono
plugs) so an M-Audio Audiophile PCI would do the job.
I figure if it's a rack unit for live use then you don't want to have
any USB or other dongles hanging off.
As this machine is going to spend most of
it's time doing DSP, I
figured more and high speed RAM is good and hence a faster FSB
which I think means a faster processor as well, specially at 400Mhz
for the FSB but is it worth it?
Depends on how many plugins you need to run at once. I can run Jack
Rack on my PII 300MHz laptop with 160MB RAM with a couple of simple
plugins. Your best bet is probably to prototype your selection of
software on a desktop machine before building your rack unit - then
you'll have an idea of the resources you'll need.
Cheers
Daniel