18 Feb
2011
18 Feb
'11
5:24 p.m.
Fri, 18 Feb 2011 14:22:54 +0100 письмо от Jeremy Jongepier <jeremy(a)autostatic.com>om>:
On 02/18/2011 01:43 PM, Mike Cookson wrote:
If you are about "load sound" and
"load multy", they all are untitled.
Minicomputer is launched by command
"minicomputer", connected
mix ports to card and virtual keyboard (vmpk)
to synth.
Now in gui: set mix and both aux volumes in amp
to max, pan to middle,
and (again) volume of both oscillators (between their frames
and filter
frames, right?), and still don't have sound.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
Did you try any of the presets? And to get it going maybe this article might be
useful:
http://www.linuxjournal.com/content/give-me-3-synths-part-2
And the manual if you'd like to dive in deeper:
http://minicomputer.sourceforge.net/minicomputerManual.pdf
I already looked manual.
I guess, actions, i made, should be enough. Btw, mt version is 1.41. Btw, now i saw
minicomputer midi port (before i saw only miniEditor port :D ), and also connected all
ports (aux, mix and separate voices) to card. But all these additional actions did not
make sence.
Best,
Jeremy
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user