9 Feb
2004
9 Feb
'04
10:11 p.m.
rossen wrote:
Chris Pickett wrote:
How do you check the speed? Do you mean the settings in the BIOS?
Because I also have a Thinkpad...
I actually took Linux off my laptop a couple of years ago because of
this problem (and joined this list in preparation for putting it back on
to do audio stuff, yada yada).
It's to do with some SpeedStep problem (google a little bit, you'll get
lots of hits).
$ cat /proc/cpuinfo
will give you the speed detected at boot time (it should be lower if you
booted off a battery).
whereas
$ cat /proc/cpufreq
should be current.
The problem has to do with the cpu slowing down when switching to
battery power and not speeding back up when getting plugged back in, or
something like that. There's some utility called cpudyn that might help
you as well.
You can read about some guy's recent experience in detail here:
http://bellet.info/~bellet/laptop/t40.html
I remember it was reporting under 200 MHz when my laptop is meant to run
at 750 MHz, and I couldn't seem to fix it at the time. I think if you
disable power management completely in the BIOS it's a usable workaround
(if you don't want to mess around more than that).
Cheers,
Chris
I am
still unable to run Jack at anything less than 1024 without having
Xrun hell. I set the HD to DMA "on" I had apm as opposed to acpi
running...turned it off and found no difference.
Check that your CPU speed is not getting screwed up by the power
management (i.e. you have the full 650 MHz). I don't know if it's
even a problem for Dell laptops, but it was/is for certain Thinkpads.