3 Jan
2021
3 Jan
'21
9:49 p.m.
"Andrew A. Grathwohl" <andrew(a)grathwohl.me> writes:
Hi folks,
I have a question about my microphone audio quality when
participating in a browser-based video conference, i.e., Google Meet and
Jitsi on chromium browser.
Starting last week, I have received numerous reports from coworkers
that my audio is considerably higher quality than normal. Although my
audio input has always been a high end vocal mic, the reports have
indicated that I sound even better than I usually do in these conferences.
My daily driver machine is a self-built Xeon workstation running
Arch Linux with (I think) a well-configured RT kernel and JACK2, whose
configuration if optimized for USB audio interfaces via this guide
<https://wiki.linuxaudio.org/wiki/list_of_jack_frame_period_settings_ideal_for_usb_interface>
[0]. I use a Peluso mic connected directly to my RME Babyface Pro
interface, which is running via one of my system's USB2 ports.
In pursuit of understanding why this is occurring, I looked at my
JACK2 settings to see if I'd changed anything lately. Sure enough, I
noticed that I have been working at a larger JACK2 hardware buffer size
than normal. I typically set my size to 64 since I do a lot of real-time
audio work, but have had it set to 256 or 512 lately to do some
different kinds of stuff on the system.
So, my question boils down to: is it reasonable to suspect the
hardware buffer size has something to do with these sudden quality
improvement reports from my friends & co-workers? If so, any insights
into why this is the case would be greatly appreciated.
The question is whether they are mixing up audio quality and connection
quality. Larger buffer sizes may reduce the likelihood of dropout.
They don't really do much else. However, a small buffer size may tax
your computer much more, leading to more noise from the power supply
and/or the computer fan. Depending on where your microphone is
positioned, that can really make a difference.
Another, less likely, source of difference may be a change of sample
rate. Having something like the Babyface Pro work at the correct final
sample rate is likely to be a very good compromise between latency and
quality.
And one thing not to underestimate is that they may attribute a change
elsewhere to quality from you: I remember a Jitsi session where
everyone's audio was plagued with echoes except for one that came across
fine, from a Mac mini user.
Guess whose computer was actually responsible for messing up everyone's
audio with echoes...
--
David Kastrup