26 Aug
2019
26 Aug
'19
12:27 a.m.
Thanks Janette and Robin,
I'm a step further! In qjackctl in the ALSA tab I have to connect my Trinket
Midi device with Midi Through and in the MIDI tab I have to connect system with
setBfree. Afterwards I have to press Ctrl Middle mouse button on the volume
knob and the slider on my Trinket Midi device. Now I can tune the volume with
my external foot pedal.
After exporting the config.cfg I see the two lines
# modificaions on top of default config
midi.controller.upper.7=swellpedal1
Janette is obviously right that this is not the default behaviour.
Thanks again
Gerhard
On Sunday 25 August 2019, Robin Gareus wrote:
On 8/25/19 8:37 PM, Gerhard Zintel wrote:
I'm trying to adjust the overall volume of
setBfreeUI sending Midi
Control Change Message #7 with different values. Unfortunately setBfree
does not react to any of those commands.
That is odd. CC7 is the default mapping for volume control. (MIDI
channel 1-3).
press 'm" to show bindings in the GUI. you can also ctrl+middle-click on
the knob to learn a new message.
BTW: I assumed by clicking Ctrl and middle mouse
button on the Volume
pot I could send a midi message to tune the slider
yes, that is correct. It should show "move slider" and wait for input.
Can you play it? Does the UI highlight keys as you play notes?
ciao,
robin
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user