15 Oct
2010
15 Oct
'10
1:08 p.m.
On 10/15/2010 12:47 PM, rosea grammostola wrote:
On Fri, Oct 15, 2010 at 12:31 PM, Jeremy Jongepier
<jeremy(a)autostatic.com> wrote:
You get a lot of xruns, then jackd says no and crashes. If it is
possible to power off/on your FireWire card then try that. Another
option might be to unload and reload the FireWire kernel module. But
first of all you need to get rid of those xruns. Try raising jackd's
prio, it's now running with prio 10 while the default is 50. Did you
lower it yourself? And I don't know what other tweaks you did. As the
co-author of the LinuxMusicians System Configuration wiki I assume you
probably tweaked your system to the max already ;)
Best,
Jeremy
On 10/15/2010 11:59 AM, rosea grammostola wrote:
Again, I got it runnin for a while, but when it died, I can't get JACK up again:
On Fri, Oct 15, 2010 at 11:13 AM, Jeremy
Jongepier
<jeremy(a)autostatic.com> wrote:
What does jackd output if you start it? On 10/14/2010 08:59 PM, rosea grammostola wrote:
> /etc/modules
>
> firewire-sbp2
> loop
>
> ~$ cat /lib/udev/rules.d/50-raw-firewire.rules
> KERNEL=="raw1394", GROUP="audio"
Hello,
According to /etc/modules you're using the new stack so the udev rule is
not necessary anymore afaik. Which version of FFADO are you using? You
need 2.0.1 in order to be able to use the new FireWire stack.
I did remove that, right.
I use ffado from svn.
I could start it once pretty ok, even played a little with yoshimi,
but then jackd died and couldn't get it up again.
Regards,
\r