Re: [LAU] how to connect computers with Netone?

i have been experimenting for a few days and have success! i tried 2 different approaches: NetJack2 and Netone - Wanting to try NetJack2, i did on the master: jack_load netmanager - On the slave: jackd -R -S -d net -l2 It does work - i can connect on the master the sounds that come from the slave. Although stated in the readme file of NetJack2 there is NO option for JackTransport Mode. Output on the slave is this: menno@huiskamer:~$ jackd -R -S -d net -l2 jackdmp 1.9.11 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2014 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK server starting in realtime mode with priority 10 self-connect-mode is "Don't restrict self connect requests" NetDriver started in sync mode without Master's transport sync. Waiting for a master... Initializing connection with muziek... **************** Network parameters **************** Name : huiskamer Protocol revision : 8 MTU : 1500 Master name : muziek Slave name : huiskamer ID : 4 Transport Sync : no Send channels (audio - midi) : 12 - 3 Return channels (audio - midi) : 10 - 3 Sample rate : 48000 frames per second Period size : 64 frames per period Network latency : 2 cycles SampleEncoder : Float Slave mode : sync **************************************************** A -t option (for Transport Mode) does not exist in NetJack2. So i tried JackNet (aka Netone): - on the master: jack_netsource -H 129.168.1.blah on the slave: jackd -R -S -d netone Here is the output: menno@huiskamer:~$ jackd -R -S -d netone jackdmp 1.9.11 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2014 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK server starting in realtime mode with priority 10 self-connect-mode is "Don't restrict self connect requests" NetOne driver started AutoConfig Override !!! AutoConfig Override: Master JACK period size is 64 AutoConfig Override: capture_channels_audio = 2 AutoConfig Override: capture_channels_midi = 1 AutoConfig Override: playback_channels_audio = 2 AutoConfig Override: playback_channels_midi = 1 MTU is set to 1400 bytes netxruns... duration: 1ms netxruns... duration: 42ms and i have JackTransport control on the master over the slave. And that's what i wanted. I wonder why NetJack2 does not have this feature. It is stated in the readme file of NetJack2 "...Thus it is actually possible to synchronize also transport...." Shall i write a bugreport? -- View this message in context: http://linux-audio.4202.n7.nabble.com/how-to-connect-computers-with-Netone-… Sent from the linux-audio-user mailing list archive at Nabble.com.