7 Feb
2004
7 Feb
'04
5:48 p.m.
Joern Nettingsmeier wrote:
Anahata wrote:
like joern says, make sure they're balanced audio cables.
On Sat, Feb 07, 2004 at 12:45:03PM +0100, Joern
Nettingsmeier wrote:
mostly microphone unfortunately. the idea is to run an eight-way symmetric audio
multicore (shielded
pairs and an outer foil shield as well) along with 4x cat5 s/stp
cables carrying 10/100/1000baseTX ethernet in the same cable duct
over a length of about 15-20 meters.
will this lead to problems in the audio signal?
Twisted pair ethernet is a balanced signal so should radiate little. If
your audio system is balanced too that will help.
With three shields between the audio and the ethernet twisted pair I
doubt if you'll experience problems. You don't mention whether the audio
cable will be carrying microphone signals or only line level - that
makes a big difference!