27 Jun
2014
27 Jun
'14
10:30 p.m.
On ven, 2014-06-27 at 07:11 -1000, david wrote:
On 06/27/2014 05:12 AM, Wayne DePrince Jr. wrote:
thanks for the info. i guess everything is going USB these days.
but can USB 3 perform as well as FW?
On gio, 2014-06-26 at 09:11 +0200, Jeremy
Jongepier wrote:
Hmmm, my understanding is that the TI firewire chips were THE best chips
to use with Linux?
On 06/26/2014 01:37 AM, Wayne DePrince Jr.
wrote:
though i mainly work at 48 kHz/24 bit, it works fine at 96/24 as
well with my Editorl FA-66. however, it appears my controller is not
VIA but TI:
04:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev
03)
05:00.0 FireWire (IEEE 1394): Texas Instruments XIO2200A IEEE-1394a-2000 Controller
(PHY/Link) (rev 01)
http://www.startech.com/Cards-Adapters/FireWire/2-Port-ExpressCard-1394a-Fi…
<http://www.startech.com/Cards-Adapters/FireWire/2-Port-ExpressCard-1394a-FireWire-Laptop-Adapter-Card%7EEC13942A2>
only problem is the previously mentioned problem with hot-plugging (i.e.
where the card must be in the laptop at boot up). otherwise works
great.
peace, w
http://subversion.ffado.org/wiki/HostControllers#VIA
So does it also work at 88.2kHz and higher for you?
Jeremy
while we are on the topic, does anyone know
of a non-Apple laptop
(current or old) that has a /powered/ Firewire 400 6 conductor port?
though the StarTech ExpressCard solution works well and provides 2x 6
conductor ports, the physical ExpressCard connection is sensitive to
vibration/movement and is easily dislodged. also, since it does not
provide power via the FireWire ports, i need to also carry around the
FA-66's power brick.
Don't know about that. My ~$1000 Linux laptop from System76 doesn't even
have an ExpressCard port: it's all USB2 and 3 only.