2 Sep
2020
2 Sep
'20
5:24 p.m.
Output works but no input?
Have you seen the two hardware pushbuttons where you can set the SOURCE
SELECT USB OUT (either M1 -M2, L -R PRE or L - R POST) You must select
the right thing there...
On 02.09.20 15:21, Mac wrote:
That's exactly what shows on this Debian box.
But, under UbuntuStudio I get:
Bus 003 Device 011: ID 22f0:0014 Allen & Heath ZEDi8
And as you note Qjack shows it as hw:ZEDi8
But, I get no input from it.
On Wed, Sep 2, 2020 at 9:13 AM Max <abonnements(a)revolwear.com
<mailto:abonnements@revolwear.com>> wrote:
I'm using the ZEDi8 without issues. Shows in QjackCtl as hw:ZEDi8
It doesn't appear to have a USB device name at all.
lsusb just lists it like this:
Bus 003 Device 011: ID 22f0:0014
USB vendor ID 22f0 is not listed in any of the databases I searched.
Seems Allen&Heath didn't want to pay to register theirs and made one
up,
an the chipset they bought didn't come with one either..
On 02.09.20 14:43, Mac wrote:
I have installed a fresh Debian 10 and I have
Qjackctl installed.
Qjackctl shows the ZEDi8 (though lsusb does not see it as a ZED,
I think
is does on Ubuntu...)
But, I can't seem to get the config to actually get audio from
the ZED,
it appears to be using the onboard sound.
My web searches have not provided any help...
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
<mailto:Linux-audio-user@lists.linuxaudio.org>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
<mailto:Linux-audio-user@lists.linuxaudio.org>
https://lists.linuxaudio.org/listinfo/linux-audio-user