24 Sep
2004
24 Sep
'04
9:25 p.m.
On Saturday 25 September 2004 03:27 am, Glenn McCord wrote:
I'm now the proud owner of a Delta 1010LT.
Unfortunately getting it to
run on Linux is proving a chore. So far I've googled a big (maybe I'm a
useless googler), and looked at the alsa-project website
So from those things I figured I would do the following...
modified my /etc/modules.d/alsa file to this
_____________________________________________________
# Alsa 0.9.X kernel modules' configuration file.
# $Header:
/home/cvsroot/gentoo-x86/media-sound/alsa-driver/files/alsa-modules.conf-rc
,v 1.1 2002/12/21 06:31:52 agenkin Exp $
# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
alias snd-card-0 snd-ice1712
# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
# Set this to the correct number of cards.
options snd cards_limit=1
I would have just run alsaconf as su...but I think this looks ok...
_________________________________________
Run the following command
#modprobe snd-ice1712;modprobe snd-pcm-oss;modprobe
snd-mixer-oss;modprobe snd-seq-oss
________________________________________
made a .asoundrc file with the following in it
pcm.ice1712 {
type hw
card 0
}
ctl.ice1712 {
type hw
card 0
}
Simple version just so I can get some playback
_______________________________________
I did the whole modules-update and restart of alsa (yes I'm using Gentoo)
I get this error when I try to run aplay
root@upstairs glenn # aplay -D ice1712 test.wav
ALSA lib pcm.c:1972:(snd_pcm_open_noupdate) Unknown PCM ice1712
aplay: main:507: audio open error: No such file or directory
1010LT has 8 analogue ins and outs...it does not know which to send to here??
Also, get the Envy24control app for your alsa version. It's a "must have"
for
the Delta 1010. You will also need to adjust levels for the seperate
channels.
_______________________________________
Basically I've just been trying to follow this
http://alsa-project.org/alsa-doc/doc-php/template.php?company=Midiman&c…
Delta+1010-LT&chip=Envy24&module=ice1712#opt
I was using a Soundblaster Live! and wanted a 1010LT with the purpose of
doing live multitrack recording with Ardour. Please tell me I can do it
because that was the main purpose of buying the card in the first place.
Have no fear...you can do all that and MUCH more. I had the same transitional
plan you did...and I'm VERY happy withj my 1010LT.
I use a distro that has rpms and alsa is built into the kernel so I'm not
sure. It looks to me like oyur starting from scratch with alsa...
Also, at the bottom of that alsa page there's some .asoundrc examples...the
one for the "hoontech" works well. It shows 10 ins and 12 outs which is odd
but it does give you your multi channel functionality.
Cheers
Cheers for any direction pointing.
Glenn