24 Jan
2013
24 Jan
'13
2:14 a.m.
On Jan 23, 2013 5:13 PM, "Paul Davis" <paul(a)linuxaudiosystems.com> wrote:
On Wed, Jan 23, 2013 at 5:10 PM, Len Ovens <len(a)ovenwerks.net> wrote:
results
if designed right.
I have been reading what I can on audio interfaces... I am thinking there
are very few good ones. I am thinking that some parts of the system are
vastly over priced like ADAT and MADI interfaces, both of which seem to
cost about 10X (at least) what they should cost... like how come a Gb NIC
is well under $100 and MADI PCI(e) card (100Mb) is $800?
Gb NIC sales: in the millions
MADI PCI(e) card sales: low thousands if you are lucky, hundreds if not
> For audio quality, it seems FW, USB and ethernet _could_ give better
none of them live "on the bus" the way a PCI card can. all of them are
subject to a separate clock, in addition to the audio sample clock and the
PCI bus clock (which is so high a frequency as to be mostly irrelevant).
Anyway you got to have a breakout box with any decent pcie card. The noise
in the power supply has to be bad on the pcie bus. It's better to use a
good external power supply. So all you really get out of the pcie is the
bus transport to some other processor in a breakout box that runs the audio
clocks adcs and dacs.
My ideal audio interface would run on something like infiniband or 10Gb
cable. Insane bandwidth. But 1Gb is good and can have latency in the low
ms. It's really cheap and flexible. Endpoints can be 100s of m away if
you can run that much copper.