2 Aug
2007
2 Aug
'07
7:01 p.m.
On Thu, Aug 02, 2007 at 12:13:40PM -0400, Paul Davis wrote:
ardour's use of busses+sends will be changing (in
trunk) in the next few
months. the new model will much more closely parallel the way hardware
consoles tend to work. and yes, sends will have their gain level
controllable from the main fader by just clicking on its name in that
particular mixer strip.
That's good news !
But I hope you will keep the flexible busses we have now. It should
be not a great problem to combine the best of both worlds.
As you describe it, it will be possible to switch individual track
faders to control a send. This is very useful, but you also want
to do this globally, e.g. to set up a monitor mix. Having to switch
all faders one by one is no practical solution.
There's a problem with Ardour's flexibility here: since it has no
predefined sends, there's no place to put a button that would switch
all faders to control any particular send. One solution would be to
require that a send must go to a bus. This both provides a master
control for the send, and a place to put a button that would switch
all faders.
--
FA
Follie! Follie! Delirio vano รจ questo !