10 Mar
2013
10 Mar
'13
2:59 a.m.
On Sat, 2013-03-09 at 10:32 -0800, Len Ovens wrote:
On Sat, March 9, 2013 9:46 am, Ralf Mardorf wrote:
Thank you :)
I disable onboard audio too, but I don't have the money for an USB
device yet. Analog mixers are still common here ;).
Regarding to the spin down issue I'm running
[rocketmouse@archlinux ~]$ cat /usr/local/sbin/no-spind
#!/bin/sh
# /usr/local/sbin/no-spind
count=0
echo 0 >/run/media/rocketmouse/u1.1tmp/.no-spind.counter
while lsusb -d 1058: >/dev/null; do
sleep 300; ((count++))
echo $count >/run/media/rocketmouse/u1.1tmp/.no-spind.counter
done
exit
at the moment. This is just a makeshift, since I need to manually mount
the partition and I need to start the scrip manually, each time USB was
disconnected.
Regards,
Ralf
I only want to be able to play at least a stereo
track (a temporary mix
of a production with much more tracks) and to record some tracks with
microphones for drums. Perhaps it's needed to use a mixer and to record
a stereo mix, I guess onboard surround devices can't record more than
stereo, especially in duplex mode.
The HDA standard (in as much as there is such a thing) is stereo in at
16bits, though some have 20bit. The 20 bits seems to be a waste of time
as, in my experience, the s/n on even the line inputs is something like an
old cassette recorder. On my desktop it is not even uniform from one
channel to the other :P I have my internal audio disabled in bios. I also
have an old ensoniq 1370 which is much quieter than any internal audio I
have heard. The ART dualUSBpre would be a better bet (or something
similar)... it does have the USB problems but it is USB1.1 so bandwidth is
low and for recording you may get away with quite a high latency anyway.
It is very small to carry and USB powered. (remembering you also mentioned
a mixer :) )
Outputs are mostly 24bit though and normally reasonable quality
amplification.