16 Jan
2006
16 Jan
'06
4:23 p.m.
Rick Wright wrote:
Lee Revell wrote:
Does this work on older SBlive 5.1 cards as well?
Thanks
R~
On Sat, 2006-01-14 at 11:56 -0500, Dave Phillips
wrote:
What Lee said.
I am using the EMU10K1 driver on both an Audigy2 EX and ZS models.
These cards both have 6 analog inputs (3 stereo lines) and the EX is
6.1 out (7 analog outputs) and the ZS is 7.1 out (8 analog outputs).
I have worked out the mapping from the pcm_capture and pcm_playback
ports to the physical analog inputs and outputs which I will share if
you are interested.
The only problem I found is that the alsa-mixer volume control sliders
are left-right switched for all of the stereo output pairs. I mean,
if you plug a standard 1/8" stereo-to-RCA cable into the stereo output
on the card, the appropriate left slider controls the signal on the
red RCA plug - which is typically the right channel - and vice versa.
This is true for all stereo output pairs.
I reported this bug to the ALSA bugtracker about a year ago
(https://bugtrack.alsa-project.org/alsa-bug/view.php?id=904), but the
behavior persists....
Rick
Greetings:
This question is directed to Lee Revell and anyone who is using or
has tried to use the multichannel capability for the ALSA SBLive
module.
When I select multichannel duplex operation in QJackCtl I get 16
channels for input and two channels for output. Is that the default
I/O channel arrangement ?
You should get 16 in and 16 out. You have to individually select the
multichannel devices for input (hw:x,2) and output (hw:x,3).