18 Sep
2014
18 Sep
'14
3:22 a.m.
On Wed, Sep 17, 2014 at 4:56 PM, Brent Busby <brent(a)keycorner.org> wrote:
On Wed, 17 Sep 2014, F. Silvain wrote:
I suggest the same as Giso. If you are learning music, you might want to
The multichannel RME devices do not support being opened with less than
full channel counts or with the wrong sample format. Any approach that ends
up using plughw:CARDNAME should work just fine. For some, using such a
device name will be deep kung-fu, for others not so much. And it may depend
on the application how easy it is.
use other audio apps at the same time anyway. So
go for the JACK Audio
Connection Kit. I've used it ever since I started with Linux. I don't have
an RME, but I have a multichannel audio interface.
I have the Multiface II, and it's nearly impossible to address through raw
Alsa without some deep kung-fu. Though Jack you should be able to see all
of its i/o's and use it with MPlayer or whatever you want.