24 May
2007
24 May
'07
5:26 p.m.
On 24 May 2007 at 12:15, Kevin Cosgrove <kevinc(a)doink.com> wrote:
On 24 May 2007 at 18:07, "Clemens Ladisch"
<cladisch(a)fastmail.net> wrote:
[snip]
Kevin Cosgrove wrote:
Try "aseqdump -p BCF2000:0" to see whether any data arrives.
If it does, there is some problem with the connection to ardour.
I just tried that, and I get
Waiting for data. Press Ctrl+C to end.
Source_ Event_________________ Ch _Data__
28:0 Note on 0 108 127
28:0 Pitch bend 4 -8032
28:0 Note on 0 107 127
28:0 Pitch bend 3 -8016 You need
to connect one of these two:
BCF2000:BCF2000 MIDI 1
BCF2000:BCF2000 MIDI 2
to this:
ardour::mcu
Well, I tried every combination of inputs and outputs I could
think of, but it didn't work. etc.
I just thought about this a little bit more. My original
problem is not that data won't come out of the BCF2000. It
works fine with ardour when ardour addresses the hardware as
device="/dev/snd/midiC3D0". But, when ardour relies on a MIDI
patchbay to connect the ardour:mcu MIDI port to a port on the
BCF2000, then the connection isn't made. At this point my
supposition for testing is that ardour listens fine and the
BCF2000 talks fine, but a connection between the two isn't being
made.
I'd like help debugging the connection issue, or confirming that
it's not a connection issue.
Thanks!
--
Kevin