21 Oct
2004
21 Oct
'04
4:22 p.m.
What's hooked to the spdif ports in your system? Are you sending to an
external D/A? Coming in from some sort of sound source that provides
spdif?
Using spdif under Jack is really no different than using an audio
port. If you send to speakers through an audio port on the SB today,
you could send to speakers by going to the spdif port, and then
externally going through a D/A, amp and speakers.
It's really just a port. How you use it depends on the equipment you
have available at the time.
(On my RME cards I use it to send and receive clocks to keep multiple
systems in sync, but this is beyond Jack.)
Cheers,
Mark
On Thu, 21 Oct 2004 15:46:15 -0300, Martin Rocamora
<mrocamora(a)adinet.com.uy> wrote:
The sound card is a SBLive.
Sorry.
El Jue 21 Oct 2004 06:59, Steve Harris escribió:
On Wed, Oct 20, 2004 at 07:01:37 -0300, Martin
Rocamora wrote:
¿How can I use the SPDIF audio card port (as
input or output) from jack
or ecasound?
You need to say what soundcard you have before anyone can help you.
JACK just writes to whatever is setup to be the outputs in the alsa mixer
settings (if its a consumer card).
- Steve