22 Jan
2005
22 Jan
'05
3:16 p.m.
Forst of all Thank you for your help.
but..
HMM failure...(output below)
Any ideas
jackstart/jackd -r 48000 -d alsa -d quattro
Gives me
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
jackd 0.99.0
Copyright 2001-2003 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
creating alsa driver ...
quattro|quattro|4096|2|48000|0|0|nomon|swmeter|-|32bit
ALSA lib pcm_hw.c:1155:(snd_pcm_hw_open) open /dev/snd/pcmC2D2p failed: No
such device
ALSA lib pcm_hw.c:1155:(snd_pcm_hw_open) open /dev/snd/pcmC2D2c failed: No
such device
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to
capture-only mode
cannot load driver module alsa
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
That device is there.. is it just invalid?
I'll Try This when my child takes a mid-day sleep.
;)
--
When asked the definition of "pi":
The Mathematician:
Pi is the number expressing the relationship between the
circumference of a circle and its diameter.
The Physicist:
Pi is 3.1415927, plus or minus 0.000000005.
The Engineer:
Pi is about 3.
Hallo,
timg(a)expressmart.com hat gesagt: // timg(a)expressmart.com wrote:
--
When asked the definition of "pi":
The Mathematician:
Pi is the number expressing the relationship between the
circumference of a circle and its diameter.
The Physicist:
Pi is 3.1415927, plus or minus 0.000000005.
The Engineer:
Pi is about 3.
OK here we go ...;)Prom going to annoy several of
you with this ;)
-- OK guys and gals,
Working on my USB quattro issue...
My .asoundrc file looks like this...(thanks to the alsa page)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# quattro1 is pcm0 which has a maximum sample rate of 44100 and 16 bit
stereo
pcm.quattro1 {
type hw
card 0
device 0
}
...
ctl.q41 {
type hw;
card 0;
}
#----
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
When I do cat /proc/asound/cards I get this.. (any way to kill that
modem
from showing up in alsa mixers)
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
0 [Modem ]: ICH-MODEM - Intel 82801CA-ICH3 Modem
Intel 82801CA-ICH3 Modem at 0x2400, irq 10
1 [I82801CAICH3 ]: ICH - Intel 82801CA-ICH3
Intel 82801CA-ICH3 at 0x1c00, irq 10
2 [Quattro ]: USB-Audio - USB Audio Quattro
M Audio USB Audio Quattro at usb-00:1d.0-1, full
speed
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
My bigest dillema are ...
1> How exactly do I modify my .asoind rc file to hit the right hw
devoce?
Everywhere you find "card 0" or "hw:0" you need to replace this with
"card 2" or "hw:2". Do not touch the "device 0" stuff,
though.
2> how do I start jackd?
For example:
$ jackstart/jackd -r 48000 -d alsa -d quattro
3> How do start jackd in the other various
modes?
Replace "quattro" with the setup you want to use, e.g. "q4" or
"q4b",
and "48000" with other samplerates, if you want to use higher rates.
Do not use 44100!
Ciao
--
Frank Barknecht _ ______footils.org__