17 Dec
2008
17 Dec
'08
10:04 a.m.
Fernando Lopez-Lezcano wrote:
On Sun, 2008-12-14 at 15:20 -0600, The Other wrote:
I found your post of September 17, 2008 entitled [Fedora-music-list]
sound card order in fc9. These are the instructions you are referring to?
I'll check them out tonight.
This may explain why my device=hw:[Audigy2] lines didn't work after a
reboot. I changed it to device=hw:1,0 and that seemed to work.
cat /proc/asound/cards currently shows:
0 [Audigy2]
1 [I82801BAICH2]
But this may be a lucky selection of cards when I rebooted, as you're
stating. Oh well, I thought I had this fixed.
As I said, later tonight I'll go through your references.
Thanks Fernando,
Stephen.
The Other wrote:
> Then I looked into the /etc/pulse/default.pa file, and went into the
> ### Load Audio Drivers section and put in this:
>
> load-module module-alsa-sink
> load-module module-alsa-source device=hw:1,0
One more caveat... the load of kernel modules is done now in parallel
(if I understand things correctly so that the boot process is faster).
That can have the unfortunate side effect that the order of the
soundcards is not necessarily always the same... check the Planet CCRMA
pages, there are instructions there on how to solve that.
-- Fernando