On Tue, Nov 14, 2006 at 07:08:11PM +0100, Julian Hagenauer wrote:
Hi,
i am using Debian testing with libpam-modules 0.79-4.
I added
@audio - rtprio 99
@audio - nice -10
@audio - memlock 250000
to /etc/security/limits.conf and i am member of the audio-group.
If i start jack with 'jackd -R -d alsa' it says:
jackd 0.101.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
nperiods = 2 for capture
nperiods = 2 for playback
As you see there no warning about missing realtime-cappabilities, anyhow realtime seems
not work, because i got a lot of xruns....
What i am missing?
Do i need other requirements to fullfill to get realtime to work, e.g. special
kernel-configuration?
Debian testing current libpam-modules 0.79-4 supports rtprio (I use it).
To be sure just run :
jackd -R -P 70 -d dummy
in another shell launch :
top -H -p `pidof jackd`
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
26812 moino 18 0 21652 21m 3892 S 0 2.1 0:00.01 jackd
26813 moino 18 0 21652 21m 3892 S 0 2.1 0:00.00 jackd
26814 moino 19 0 21652 21m 3892 S 0 2.1 0:00.00 jackd
26815 moino -81 0 21652 21m 3892 S 0 2.1 0:00.00 jackd
26816 moino *-71* 0 21652 21m 3892 S 0 2.1 0:00.00 jackd
If rlimit is not working you won't see a thread at prio -71
Don't be afraid if you don't have the thread at -81 you must have an
old version of jackd.
If you can verify this you can be sure your problem does not come from
rlimit or realtime stuff.
You will have to investigate more.
Goood luck.
PS. If you have a dual core setup I'm not sure your jackd version is patched
against some hw clock drift problems. Do you have the --clocksource
option when you launch jackd -h ?
David.