6 Nov
2006
6 Nov
'06
6:02 a.m.
Chip VanDan wrote:
I have an old-style MIDI cable, one with a joystick
plug on the end
and a MIDI in and a MIDI out on the other end, which to the best of my
knowledge is hooked up properly.
Error inserting snd_mpu401: No such device
Using a gameport-MIDI interface with a gameport on the motherboard
should work automatically if the MIDI port is enabled in the BIOS setup
and if ACPI is enabled. Without ACPI, you have to specify port address
and interrupt manually, as in:
modprobe snd-mpu401 port=0x330 irq=10
(however, look up the actual values in the BIOS setup)
HTH
Clemens